NSN 5990-00-965-9610 · NIIN 009659610 · FSC 5990
NO DASHES 5990009659610
In Stock
SYNCHRO,RECEIVER
Synchros and Resolvers
Technical characteristics
40 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 6.0 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 26.0 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0620 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 90.0 |
| AJSL | BODY SIZE | 11 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 35.00 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 8.10 |
| AJTA | ZRS RESISTANCE IN OHMS | NOMINAL 49.50 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 18.00 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 7.50 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 280.0 |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES NOMINAL 0.0260 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 470.00 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| CQTM | TERMINAL LOCATION | REAR |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 1.0000 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0500 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.0620 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES NOMINAL 0.1200 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.5000 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 0.485 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 5.000 |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | NOMINAL 24.00 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES NOMINAL 0.0250 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0 TO 7.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 16.0 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES NOMINAL 1.9500 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES NOMINAL 0.9750 |
| AAVL | PILOT DIAMETER | INCHES NOMINAL 0.6250 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.3370 |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 288.00 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0930 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 70.00 |
| ABKK | FLANGE DIAMETER | INCHES NOMINAL 1.0620 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | INPUT 30.00 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 905-113-0001 | 1K426 |
| 11TR-0326F | 51761 |
| 905-113-0001 | 99932 |
| 45-4107-02-01 | 99932 |
| 4107-02-01 | 99932 |
Supersedes
This item replaces cancelled NIIN 000545886. An older drawing citing one of those numbers resolves here.