NSN 5990-00-967-3793 · NIIN 009673793 · FSC 5990
NO DASHES 5990009673793
In Stock
RESOLVER,ELECTRICAL
Synchros and Resolvers
Technical characteristics
40 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 2.4200 |
| AJVC | COMPENSATOR DC RESISTANCE IN OHMS | NOMINAL 440.00 |
| AAVL | PILOT DIAMETER | INCHES NOMINAL 0.6250 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | INCH-OUNCES MAXIMUM 0.33 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.9700 AND INCHES MAXIMUM 0.9800 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 2.0000 |
| CQTM | TERMINAL LOCATION | REAR |
| AJTX | COMPENSATION METHOD | WINDING COMPENSATED |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 2000.00 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES NOMINAL 0.0300 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES MINIMUM 0.4045 AND INCHES MAXIMUM 0.4075 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 0.980 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES MINIMUM 0.8090 AND INCHES MAXIMUM 0.8150 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 220.00 |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES NOMINAL 0.0300 |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| AJWQ | PILOT LENGTH | INCHES MINIMUM 0.0590 AND INCHES MAXIMUM 0.0650 |
| ABRY | LENGTH | SHOULDER INCHES MINIMUM 0.0590 AND INCHES MAXIMUM 0.0650 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES NOMINAL 0.1873 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MINIMUM 0.3900 AND INCHES MAXIMUM 0.4200 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJSL | BODY SIZE | 11 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | MAXIMUM 26.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 605.00 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 400.00 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 300.00 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 250.00 |
| AAQL | BODY STYLE | |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 7.000 |
| AJVJ | INTERAXIS ERROR ANGULAR RANGE IN MINUTES | -5.0 TO 5.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 8 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.0610 |
| ABKU | FLANGE THICKNESS | INCHES MINIMUM 0.0900 AND INCHES MAXIMUM 0.0960 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.9995 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0470 AND INCHES MAXIMUM 0.0530 |
| AJVD | COMPENSATOR TRANSFORMATION RATIO IN PERCENT | ROTOR TO COMPENSATOR NOMINAL 1.000 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | INCH-OUNCES MAXIMUM 0.11 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 512-104-903-4 | 07421 |
| VRP11-4D9-50 | 10112 |
| 11RC26 | 10112 |