NSN 5990-00-968-7685 · NIIN 009687685 · FSC 5990
NO DASHES 5990009687685
In Stock
SYNCHRO,CONTROL TRANSFORMER
Synchros and Resolvers
Technical characteristics
37 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| FEAT | SPECIAL FEATURES | REAR SHAFT DIM. 0.3550 IN. NOM LG,0.0880 IN. MIN,0.0900 IN. MAX LG |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 1030.00 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 720.00 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 350.00 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES MINIMUM 0.0220 AND INCHES MAXIMUM 0.0320 |
| CRSJ | SHAFT TYPE | BOTH SHAFTS ROUND, SLOTTED |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES NOMINAL 0.0700 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.9995 AND INCHES MAXIMUM 1.0000 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 16.0 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES NOMINAL 0.6250 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 90.0 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.8350 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.6245 AND INCHES MAXIMUM 0.6250 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.7520 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.0610 AND INCHES MAXIMUM 1.0620 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0930 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 0.9750 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0500 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.0620 |
| ABWV | SHAFT DIAMETER | FRONT SHAFT INCHES MINIMUM 0.1195 AND INCHES MAXIMUM 0.1200 |
| ABXF | SHAFT LENGTH | FRONT SHAFT INCHES NOMINAL 0.5620 |
| AJSL | BODY SIZE | 11 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 220.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0 TO 7.0 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS MAXIMUM 6.0 |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 5300.00 |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES MINIMUM 0.0220 AND INCHES MAXIMUM 0.0320 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 510.00 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT MAXIMUM 4.800 |
| CQTM | TERMINAL LOCATION | REAR |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 5 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 3100.00 |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0620 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| BTC-11-KF-8 | 4H618 |
| ETC11KF8 | 99932 |
| BTC-11-KF-8 | 99932 |
| ETH11KF8 | 99932 |
| 10049275 | 18876 |
Supersedes
This item replaces cancelled NIIN 009687728. An older drawing citing one of those numbers resolves here.