NSN 5990-00-969-8838 · NIIN 009698838 · FSC 5990
NO DASHES 5990009698838
In Stock
RESOLVER,ELECTRICAL
Synchros and Resolvers
Technical characteristics
37 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJVC | COMPENSATOR DC RESISTANCE IN OHMS | NOMINAL 520.00 |
| TTQY | TERMINAL TYPE AND QUANTITY | PIN 12 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES NOMINAL 1.1000 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 0.980 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND |
| AAQL | BODY STYLE | |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 2500.00 |
| AJSL | BODY SIZE | 15 |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES NOMINAL 0.1250 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 15.00 |
| AJVJ | INTERAXIS ERROR ANGULAR RANGE IN MINUTES | -5.0 TO 5.0 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 320.00 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 390.00 |
| AJTX | COMPENSATION METHOD | WINDING COMPENSATED |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 60.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | INCH-OUNCES MAXIMUM 0.20 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | INCH-OUNCES MAXIMUM 0.10 |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| AJVK | OUTPUT VOLTAGE FUNCTIONAL ERROR RANGE IN PERCENT | -0.1 TO 0.1 |
| CQTM | TERMINAL LOCATION | REAR |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 480.00 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 1.3115 AND INCHES MAXIMUM 1.3120 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.8745 AND INCHES MAXIMUM 0.8750 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.4780 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.4340 AND INCHES MAXIMUM 1.4370 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0930 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 1.3120 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0780 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.1320 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1867 AND INCHES MAXIMUM 0.1872 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MINIMUM 0.5620 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0400 |
| AJVD | COMPENSATOR TRANSFORMATION RATIO IN PERCENT | ROTOR TO COMPENSATOR NOMINAL 0.990 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 8.500 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.9160 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| VRS15-4B17 | 10651 |
| 10049399 | 18876 |