NSN 5990-00-973-7531 · NIIN 009737531 · FSC 5990
NO DASHES 5990009737531
In Stock
SYNCHRO,TRANSMITTER
Synchros and Resolvers
Technical characteristics
48 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWXK | SHAFT RADIAL PLAY DETERMINING WEIGHT | OUNCES 8.0 |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 96 |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 5 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 190.0 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | WATTS NOMINAL 4.5 |
| AJWH | SHAFT END PLAY | INCHES MINIMUM 0.0005 AND INCHES MAXIMUM 0.0025 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0430 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MAXIMUM 1.9900 |
| AAVL | PILOT DIAMETER | INCHES MAXIMUM 0.6000 |
| AJWV | AFT OF FIRST FLANGE DIAMETER | INCHES MAXIMUM 1.9995 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 3.5820 |
| CSJY | TRANSFORMATION RATIO | STATOR TO ROTOR NOMINAL 0.783 |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | NOMINAL 78.70 |
| AAZW | SECOND SHOULDER DIAMETER | INCHES MAXIMUM 1.9995 |
| AAZX | SECOND SHOULDER LENGTH | INCHES MAXIMUM 0.1700 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 4.3150 |
| ABKK | FLANGE DIAMETER | INCHES MAXIMUM 2.2500 |
| ABKU | FLANGE THICKNESS | INCHES MAXIMUM 0.2500 |
| ABPM | BODY DIAMETER | INCHES MAXIMUM 1.9900 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.2500 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MAXIMUM 0.2405 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.6760 |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | |
| AJXB | SHAFT MAXIMUM RUNOUT | INCHES 0.0008 |
| CWYF | SHAFT END PLAY DETERMINING WEIGHT | OUNCES 16.0 |
| FEAT | SPECIAL FEATURES | SLEEVE PRESSED ON SHAFT;SHAFT RADIAL PLAY TEST POINT 0.125 INCHES MAX |
| AJTA | ZRS RESISTANCE IN OHMS | NOMINAL 262.00 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT SPLINE |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AHCG | MAXIMUM TEMP RISE | CELSIUS 44.0 |
| AJSL | BODY SIZE | 23 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 115.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 60.0 |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| CQTM | TERMINAL LOCATION | REAR |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 53.60 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 9.900 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -8.0 TO 8.0 |
| AJVM | SPLINE TOOTH QUANTITY | 22 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | INCH-OUNCES NOMINAL 0.20 |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | INCH-OUNCES MINIMUM 0.120 |
| AJWG | SHAFT MAXIMUM RADIAL PLAY | INCHES 0.0010 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 77.00 |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 525.00 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 219.00 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 215.00 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 95.60 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| N2670-44944 | 80020 |