NSN 5990-00-978-4936 · NIIN 009784936 · FSC 5990
NO DASHES 5990009784936
In Stock
SYNCHRO,TRANSMITTER
Synchros and Resolvers
Technical characteristics
40 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES NOMINAL 0.8120 |
| CWBH | SHAFT NOMINAL THREAD SIZE | SINGLE SHAFT INCHES 0.190 |
| CQWQ | SHAFT THREAD LENGTH | SINGLE SHAFT INCHES NOMINAL 0.1970 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES MAXIMUM 60.0 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-S-20708 |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 5 |
| AHCG | MAXIMUM TEMP RISE | CELSIUS 25.0 |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| CQTM | TERMINAL LOCATION | REAR |
| AJTN | ZSS IMPEDANCE MAGNITUDE IN OHMS | MINIMUM 180.00 AND MAXIMUM 250.00 |
| AJTP | ZSS IMPEDANCE ANGLE IN DEG | MINIMUM 20.00 AND MAXIMUM 28.00 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT MAXIMUM 6.000 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | WATTS MAXIMUM 1.0 |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | INCH-OUNCES MAXIMUM 0.070 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.0570 AND INCHES MAXIMUM 1.0620 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.0620 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1870 AND INCHES MAXIMUM 0.1872 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.5620 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT SPLINE W/THREADS |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES NOMINAL 0.1250 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 0.783 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.9995 AND INCHES MAXIMUM 1.0000 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.6245 AND INCHES MAXIMUM 0.6250 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.3560 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0 TO 7.0 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0930 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 0.9750 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0620 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES NOMINAL 1.7940 |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 120 |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | SINGLE SHAFT UNF |
| AKAF | SHAFT THREAD DIRECTION | SINGLE SHAFT RIGHT-HAND |
| AKAN | SHAFT THREAD CLASS | 2A |
| AJSL | BODY SIZE | 11 |
| AJVM | SPLINE TOOTH QUANTITY | 21 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 115.0 |
Cross-references
11 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| M20708/4-01C | 81349 |
| 11TX4C | 81349 |
| MIL-S-20708/4 | 81349 |
| 11TX4C001 | 81349 |
| M20708-4C001 | 81349 |
| M20708-4-001 | 81349 |
| MILS20708-4C | 81349 |
| 5990PL0812277 | 9009H |
| M20708/4-001 | 96906 |
| 11TX4C | 05088 |
| 11TX-336-G-3 | 06989 |
Supersedes
This item replaces cancelled NIINs 003210574 · 005385996. An older drawing citing one of those numbers resolves here.