NSN 5990-00-983-7530 · NIIN 009837530 · FSC 5990
NO DASHES 5990009837530
In Stock
SYNCHRO,RECEIVER
Synchros and Resolvers
Technical characteristics
43 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0780 |
| ABRY | LENGTH | SHOULDER INCHES MINIMUM 0.1290 AND INCHES MAXIMUM 0.1350 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 1.3090 AND INCHES MAXIMUM 1.3150 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | INCH-OUNCES NOMINAL 0.05 |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | INCH-OUNCES NOMINAL 0.030 |
| AJWQ | PILOT LENGTH | INCHES MINIMUM 0.0370 AND INCHES MAXIMUM 0.0430 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MINIMUM 1.7690 AND INCHES MAXIMUM 1.7750 |
| AAQL | BODY STYLE | |
| CQTM | TERMINAL LOCATION | REAR |
| CQWQ | SHAFT THREAD LENGTH | SINGLE SHAFT INCHES NOMINAL 0.2000 |
| AJVN | RECEIVER ERROR ANGULAR RANGE IN MINUTES | -45.0 TO 45.0 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 2.4890 AND INCHES MAXIMUM 2.5150 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.4340 AND INCHES MAXIMUM 1.4400 |
| ABKU | FLANGE THICKNESS | INCHES MINIMUM 0.0900 AND INCHES MAXIMUM 0.0960 |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 120 |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | SINGLE SHAFT UNF |
| AKAF | SHAFT THREAD DIRECTION | SINGLE SHAFT RIGHT-HAND |
| AKAN | SHAFT THREAD CLASS | 2A |
| AKEJ | MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| AJSL | BODY SIZE | 15 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 115.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 200.0 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | WATTS NOMINAL 3.1 |
| AJTG | ZRO IMPEDANCE MAGNITUDE IN OHMS | NOMINAL 675.50 |
| AJTH | ZRO IMPEDANCE ANGLE IN DEG | NOMINAL 83.50 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1870 AND INCHES MAXIMUM 0.1872 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MINIMUM 0.6220 AND INCHES MAXIMUM 0.6420 |
| AHYF | SECURING HOLE QUANTITY | 4 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 5 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 53.00 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 44.00 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 4.600 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -3.0 TO 3.0 |
| AJVM | SPLINE TOOTH QUANTITY | 21 |
| CRYY | MOUNTING FACILITY NOMINAL SCREW THREAD DIAMETER | INCHES 0.112 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 0.767 |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES NOMINAL 0.1250 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES NOMINAL 1.1030 |
| CWBH | SHAFT NOMINAL THREAD SIZE | SINGLE SHAFT INCHES 0.190 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT SPLINE W/THREADS |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 1.3114 AND INCHES MAXIMUM 1.3120 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.8745 AND INCHES MAXIMUM 0.8750 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| AY150FA5B3 | 55972 |
| 147-006-0001 | 95542 |
| 105C2E5 | 97497 |
| 105C2E7 | 99479 |
| 147-006-0001 MOD BY SRS 27823 | 99932 |