NSN 5990-00-989-0395 · NIIN 009890395 · FSC 5990
NO DASHES 5990009890395
In Stock
SYNCHRO,DIFFERENTIAL TRANSMITTER
Synchros and Resolvers
Technical characteristics
43 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJTC | ZSS RESISTANCE IN OHMS | NOMINAL 17.90 |
| AAQL | BODY STYLE | |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES NOMINAL 0.1250 |
| CSFG | PLUS J ZSS REACTANCE IN OHMS | NOMINAL 10.90 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES NOMINAL 0.8750 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 6 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 13.40 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 10.10 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 5.900 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 18.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -15.0 TO 15.0 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.4360 AND INCHES MAXIMUM 1.4370 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0930 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 1.3120 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0780 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.1320 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1195 AND INCHES MAXIMUM 0.1200 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.5400 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 1.3115 AND INCHES MAXIMUM 1.3120 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.4995 AND INCHES MAXIMUM 0.5000 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.1310 |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES MINIMUM 0.0210 AND INCHES MAXIMUM 0.0310 |
| AHCG | MAXIMUM TEMP RISE | CELSIUS 6.0 |
| AJSL | BODY SIZE | 15 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 11.8 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 130.0 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 235.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 15.10 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 13.50 |
| AJTA | ZRS RESISTANCE IN OHMS | NOMINAL 15.70 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0400 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 45.0 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 15.0 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES NOMINAL 1.5910 |
| CQRG | BODY MATERIAL | ALUMINUM |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES MINIMUM 0.0210 AND INCHES MAXIMUM 0.0310 |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | NOMINAL 8.40 |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| CQTM | TERMINAL LOCATION | REAR |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 77.20 |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 63.20 |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| AY-231-S-25T | 19315 |
| AY231S25T | 55972 |
| 405255-4 | 96214 |
| AY231S25T | 96774 |
| CDH-15-DS-1/A004 | 99932 |
| 15-4039-07 | 99932 |