NSN 5990-01-011-8022 · NIIN 010118022 · FSC 5990
NO DASHES 5990010118022
In Stock
RESOLVER,ELECTRICAL
Synchros and Resolvers
Technical characteristics
37 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MAXIMUM 1.0000 |
| AAVL | PILOT DIAMETER | INCHES MAXIMUM 0.6250 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 3.6500 |
| ABKK | FLANGE DIAMETER | INCHES MAXIMUM 1.0750 |
| ABKU | FLANGE THICKNESS | INCHES MAXIMUM 0.0960 |
| ABPA | UNDERCUT DIAMETER | INCHES MAXIMUM 0.9800 |
| ABPC | UNDERCUT WIDTH | INCHES MAXIMUM 0.0750 |
| ABRY | LENGTH | SHOULDER INCHES MAXIMUM 0.0650 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1247 AND INCHES MAXIMUM 0.1249 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MINIMUM 0.5950 AND INCHES MAXIMUM 0.6150 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AHCG | MAXIMUM TEMP RISE | CELSIUS 10.0 |
| AJSL | BODY SIZE | 11 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 15.0 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES MAXIMUM 30.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJTX | COMPENSATION METHOD | WINDING COMPENSATED |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 0.150 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | OUTPUT 20.00 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 25.00 |
| AJVJ | INTERAXIS ERROR ANGULAR RANGE IN MINUTES | -3.0 TO 3.0 |
| AJVK | OUTPUT VOLTAGE FUNCTIONAL ERROR RANGE IN PERCENT | -0.1 TO 0.1 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | INCH-OUNCES MAXIMUM 0.10 |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| AJWQ | PILOT LENGTH | INCHES MAXIMUM 0.0650 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 3.1000 |
| CQTM | TERMINAL LOCATION | REAR |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES MINIMUM 0.0200 AND INCHES MAXIMUM 0.0400 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES MINIMUM 0.0150 AND INCHES MAXIMUM 0.0350 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES MINIMUM 0.1250 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 1.0000 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES NOMINAL 0.8120 |
| FEAT | SPECIAL FEATURES | 1 SPUR GEAR WITH 83 TEETH AND DIAMETRAL PITCH OF 80 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 12 |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| U-216689 | 54395 |
| U-216689 | 82686 |
| 976068-2C | 82577 |
| CR09624080 | 88818 |
| CR09624080 | 05088 |
| 11RB22 | 08719 |