NSN 5990-01-015-7502 · NIIN 010157502 · FSC 5990
NO DASHES 5990010157502
In Stock
RESOLVER,ELECTRICAL
Synchros and Resolvers
Technical characteristics
52 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 1.1315 AND INCHES MAXIMUM 1.3120 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.8745 AND INCHES MAXIMUM 0.8750 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 2.4400 AND INCHES MAXIMUM 2.4600 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.4340 AND INCHES MAXIMUM 1.4370 |
| ABKU | FLANGE THICKNESS | INCHES MINIMUM 0.0900 AND INCHES MAXIMUM 0.0960 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0780 |
| ABRY | LENGTH | SHOULDER INCHES MINIMUM 0.1290 AND INCHES MAXIMUM 0.1350 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1870 AND INCHES MAXIMUM 0.1872 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MINIMUM 0.5300 AND INCHES MAXIMUM 0.5500 |
| AHYF | SECURING HOLE QUANTITY | 3 |
| AJSL | BODY SIZE | 15 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 5.0 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES MAXIMUM 6.2 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | MILLIWATTS MAXIMUM 30.0 |
| AJSS | FREQUENCY IN HERTZ | MINIMUM 29.7 AND MAXIMUM 30.3 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 1250.00 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 670.00 |
| AJTA | ZRS RESISTANCE IN OHMS | NOMINAL 1900.00 |
| AJTC | ZSS RESISTANCE IN OHMS | NOMINAL 930.00 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | MINIMUM 1116.00 AND MAXIMUM 1364.00 |
| AJTT | STATOR DC RESISTANCE IN OHMS | MINIMUM 576.00 AND MAXIMUM 704.00 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT MAXIMUM 50.000 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 40.00 |
| AJVJ | INTERAXIS ERROR ANGULAR RANGE IN MINUTES | -15.0 TO 15.0 |
| AJVM | SPLINE TOOTH QUANTITY | 21 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS MAXIMUM 4.0 |
| AJWE | SHAFT RADIAL PLAY TEST POINT | INCHES NOMINAL 0.125 |
| AJWG | SHAFT MAXIMUM RADIAL PLAY | INCHES 0.0004 |
| AJWH | SHAFT END PLAY | INCHES MAXIMUM 0.0015 |
| AJWQ | PILOT LENGTH | INCHES MINIMUM 0.0370 AND INCHES MAXIMUM 0.0430 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MINIMUM 1.7750 AND INCHES MAXIMUM 1.7810 |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 120 |
| AJXB | SHAFT MAXIMUM RUNOUT | INCHES 0.0008 |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | SINGLE SHAFT UNF |
| AKAF | SHAFT THREAD DIRECTION | SINGLE SHAFT RIGHT-HAND |
| AKAN | SHAFT THREAD CLASS | 2A |
| AKEJ | MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| CQTM | TERMINAL LOCATION | REAR |
| CQWQ | SHAFT THREAD LENGTH | SINGLE SHAFT INCHES NOMINAL 0.2100 |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 1350.00 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 650.00 |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | NOMINAL 700.00 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT SPLINE W/THREADS |
| CRYY | MOUNTING FACILITY NOMINAL SCREW THREAD DIAMETER | INCHES 0.120 |
| CSFG | PLUS J ZSS REACTANCE IN OHMS | NOMINAL 300.00 |
| CSJY | TRANSFORMATION RATIO | STATOR TO ROTOR MINIMUM 0.960 AND STATOR TO ROTOR MAXIMUM 1.040 |
| CWBH | SHAFT NOMINAL THREAD SIZE | SINGLE SHAFT INCHES 0.184 |
| CWXK | SHAFT RADIAL PLAY DETERMINING WEIGHT | OUNCES 8.0 |
| CWYF | SHAFT END PLAY DETERMINING WEIGHT | OUNCES 8.0 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 8 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 561734-000 | 56232 |
| VRS15-3C2 | 10112 |
| 3162694 | 10001 |