NSN 5990-01-026-8628 · NIIN 010268628 · FSC 5990
NO DASHES 5990010268628
In Stock
SYNCHRO,CONTROL TRANSFORMER
Synchros and Resolvers
Technical characteristics
38 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES NOMINAL 1.3120 |
| AAVL | PILOT DIAMETER | INCHES NOMINAL 0.5000 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 1.8220 |
| ABKK | FLANGE DIAMETER | INCHES NOMINAL 1.4370 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0930 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0780 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.1320 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES NOMINAL 0.1250 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.3840 |
| AJSL | BODY SIZE | 15 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 11.8 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 67.0 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 110.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 1530.00 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 265.00 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 475.00 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 92.00 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT MINIMUM 1.000 AND INPUT TO OUTPUT MAXIMUM 2.600 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -3.0 TO 3.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 15.00 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 6.00 |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0400 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.6000 |
| ALNF | SHAFT HOLE DIAMETER | SINGLE SHAFT INCHES NOMINAL 0.0470 |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 8350.00 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 1510.00 |
| CRJX | SHAFT TAPERED END MINOR DIAMETER | SINGLE SHAFT INCHES NOMINAL 0.0775 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, TAPERED, HOLLOWED |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES NOMINAL 0.1250 |
| CSLT | SHAFT TAPER ANGLE IN DEG | 3.0 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES NOMINAL 0.8750 |
| CWAC | SHAFT TAPER LENGTH | SINGLE SHAFT INCHES NOMINAL 0.1940 |
| MATT | MATERIAL | BODY ALUMINUM |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| CTH-15-AD-5/A473 | 99932 |