NSN 5990-01-035-6869 · NIIN 010356869 · FSC 5990
NO DASHES 5990010356869
In Stock
RESOLVER,ELECTRICAL
Synchros and Resolvers
Technical characteristics
34 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.4995 AND INCHES MAXIMUM 0.5000 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 1.7500 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 0.7470 AND INCHES MAXIMUM 0.7500 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0620 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.6880 AND INCHES MAXIMUM 0.6910 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES NOMINAL 0.0900 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.5000 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJSL | BODY SIZE | 8 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 26.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 20.0 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 105.0 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 400.00 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 300.00 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 315.00 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 210.00 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 11.500 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 35.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0 TO 7.0 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 3.0 |
| AJWQ | PILOT LENGTH | INCHES MINIMUM 0.0380 AND INCHES MAXIMUM 0.0430 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.2400 |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 1550.00 |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES NOMINAL 0.0300 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 1250.00 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES NOMINAL 0.0250 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| CSJY | TRANSFORMATION RATIO | STATOR TO ROTOR NOMINAL 0.846 |
| MATT | MATERIAL | BODY ALUMINUM ALLOY |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 7 |
Cross-references
9 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 75515023-1 | 1K426 |
| 14339-001 | 22830 |
| ZL6-A | 51761 |
| CM4-1034-173 | 88818 |
| 75515023-1 | 99932 |
| CSH-8-BA-0004/L902 | 99932 |
| CM4-1034-173 | 05088 |
| 8RC-300-Y-3 | 06989 |
| 14339-001 | 10138 |
Supersedes
This item replaces cancelled NIIN 010439007. An older drawing citing one of those numbers resolves here.