NSN 5990-01-054-4255 · NIIN 010544255 · FSC 5990
NO DASHES 5990010544255
In Stock
SYNCHRO,DIFFERENTIAL TRANSMITTER
Synchros and Resolvers
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES NOMINAL 1.3120 |
| AAVL | PILOT DIAMETER | INCHES NOMINAL 0.8750 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 3.2170 |
| ABKK | FLANGE DIAMETER | INCHES NOMINAL 1.4370 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0930 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0780 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.1320 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES NOMINAL 0.1872 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.5000 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJSL | BODY SIZE | 15 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJSY | ZSO RESISTANCE IN OHMS | MINIMUM 2050.00 AND MAXIMUM 2600.00 |
| AJTA | ZRS RESISTANCE IN OHMS | MINIMUM 900.00 AND MAXIMUM 1200.00 |
| AJTE | ZSO-90 RESISTANCE IN OHMS | MINIMUM 2050.00 AND MAXIMUM 2600.00 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 9.000 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | INPUT 60.00 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 100.00 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | INCH-OUNCES NOMINAL 20.00 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0400 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 2.6770 |
| CQRG | BODY MATERIAL | ALUMINUM ALLOY |
| CQTM | TERMINAL LOCATION | REAR |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | MINIMUM 77.00 AND MAXIMUM 83.00 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 1.154 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--ILS20708 |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 5 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-S-20708 TO 22 |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| M20708/22-02C | 81349 |
| MIL-S-20708/22 | 81349 |
| 15CDX6C | 81349 |
| M20708/22-02C | 0U583 |
| SAE-AS20708/22 | 0U583 |
| VCDX15-6N3 | 10112 |