NSN 5990-01-076-8901 · NIIN 010768901 · FSC 5990
NO DASHES 5990010768901
In Stock
SYNCHRO,RECEIVER-TRANSMITTER
Synchros and Resolvers
Technical characteristics
36 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES NOMINAL 1.9900 |
| AAVL | PILOT DIAMETER | INCHES NOMINAL 0.6000 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 4.7590 |
| ABKK | FLANGE DIAMETER | INCHES NOMINAL 2.2500 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.2500 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 1.9995 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.2030 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.0430 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES NOMINAL 0.2405 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.6760 |
| AJSL | BODY SIZE | 23 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 114.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 60.0 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 231.0 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | WATTS NOMINAL 6.0 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 93.00 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 106.00 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 10.000 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -8.0 TO 8.0 |
| AJVM | SPLINE TOOTH QUANTITY | 22 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.1700 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 3.1600 |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 96 |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | SINGLE SHAFT UNF |
| AKAF | SHAFT THREAD DIRECTION | SINGLE SHAFT RIGHT-HAND |
| AKAN | SHAFT THREAD CLASS | 2A |
| CQTM | TERMINAL LOCATION | REAR |
| CQWQ | SHAFT THREAD LENGTH | SINGLE SHAFT INCHES NOMINAL 0.3860 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT SPLINE W/THREADS |
| CRTL | CRITICALITY CODE JUSTIFICATION | FEAT |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 0.783 |
| CWBH | SHAFT NOMINAL THREAD SIZE | SINGLE SHAFT INCHES 0.250 |
| FEAT | SPECIAL FEATURES | ITEM MUST COMPLY WITH REQUIREMENTS OF DESC PRODUCTION STANDARD NO. L02723,FOR NAVY NUCLEAR PROPULSION PLANT PRODUCTS ONLY |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 6 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 123255-1 | 94271 |
| VTRX23/36-6A | 10112 |
| L02723 | 16236 |