NSN 5990-01-084-8330 · NIIN 010848330 · FSC 5990
NO DASHES 5990010848330
In Stock
SYNCHRO,DIFFERENTIAL TRANSMITTER
Synchros and Resolvers
Technical characteristics
41 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 2.6950 AND INCHES MAXIMUM 2.7000 |
| AAVL | PILOT DIAMETER | INCHES NOMINAL 0.2970 |
| AAZW | SECOND SHOULDER DIAMETER | INCHES MINIMUM 2.7490 AND INCHES MAXIMUM 2.7500 |
| AAZX | SECOND SHOULDER LENGTH | INCHES NOMINAL 0.3750 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 5.3550 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 3.0990 AND INCHES MAXIMUM 3.1000 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.2500 |
| ABPM | BODY DIAMETER | INCHES MAXIMUM 2.7000 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.6150 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.2403 AND INCHES MAXIMUM 0.2405 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MINIMUM 0.6900 AND INCHES MAXIMUM 0.7100 |
| AHCG | MAXIMUM TEMP RISE | CELSIUS 18.0 |
| AJSL | BODY SIZE | 31 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 90.0 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES MAXIMUM 725.0 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | WATTS MAXIMUM 7.7 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 60.0 |
| AJTA | ZRS RESISTANCE IN OHMS | MAXIMUM 44.00 |
| AJTM | ZRS IMPEDANCE ANGLE IN DEG | MINIMUM 27.00 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | MAXIMUM 24.00 |
| AJTT | STATOR DC RESISTANCE IN OHMS | MAXIMUM 19.00 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT MAXIMUM 6.500 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -10.0 TO 10.0 |
| AJVM | SPLINE TOOTH QUANTITY | 22 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | INCH-OUNCES MAXIMUM 0.50 |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | INCH-OUNCES MINIMUM 0.300 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0300 |
| AJWV | AFT OF FIRST FLANGE DIAMETER | INCHES MINIMUM 2.7490 AND INCHES MAXIMUM 2.7500 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES NOMINAL 4.4063 |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 96 |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | SINGLE SHAFT UNF |
| AKAF | SHAFT THREAD DIRECTION | SINGLE SHAFT RIGHT-HAND |
| AKAN | SHAFT THREAD CLASS | 2A |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| CQTM | TERMINAL LOCATION | REAR |
| CQWQ | SHAFT THREAD LENGTH | SINGLE SHAFT INCHES NOMINAL 0.3640 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT SPLINE W/THREADS |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 1.154 |
| CWBH | SHAFT NOMINAL THREAD SIZE | SINGLE SHAFT INCHES 0.250 |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 6 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| VTDX31-6N1 | 10112 |
| 555444 | 14139 |