NSN 5990-01-093-0836 · NIIN 010930836 · FSC 5990
NO DASHES 5990010930836
In Stock
SYNCHRO,TRANSMITTER
Synchros and Resolvers
Technical characteristics
33 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAVH | SHOULDER DIAMETER | INCHES NOMINAL 1.0000 |
| AAVL | PILOT DIAMETER | INCHES NOMINAL 0.6250 |
| ABKK | FLANGE DIAMETER | INCHES NOMINAL 1.0620 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0930 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 1.0000 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0500 |
| ABPM | BODY DIAMETER | INCHES MAXIMUM 1.0670 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.0620 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES NOMINAL 0.1200 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.5000 |
| AJSL | BODY SIZE | 11 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 26.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES MAXIMUM 90.0 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | WATTS NOMINAL 0.3 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 56.00 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 11.80 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 27.50 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 9.70 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 4.500 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -10.0 TO 10.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS MAXIMUM 15.0 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS MAXIMUM 3.0 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0620 |
| AKEJ | MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 355.00 |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES NOMINAL 0.0310 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 61.00 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES NOMINAL 0.0310 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| CRYY | MOUNTING FACILITY NOMINAL SCREW THREAD DIAMETER | INCHES 0.112 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 2 |
Cross-references
7 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 11TX-0874-F | 51761 |
| CR40919006 | 88818 |
| TGH-11-FS-3/A004 | 99932 |
| 414-00154-007 | F6151 |
| 414-00154-007 | F6158 |
| 414-00154-007 | FAQ15 |
| 2578850-1 | 07187 |