NSN 5990-01-107-8682 · NIIN 011078682 · FSC 5990
NO DASHES 5990011078682
In Stock
TRANSOLVER,ELECTRICAL
Synchros and Resolvers
Technical characteristics
47 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| AAVL | PILOT DIAMETER | INCHES MAXIMUM 0.5000 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 1.7460 |
| ABKK | FLANGE DIAMETER | INCHES MAXIMUM 0.7500 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0620 |
| ABPA | UNDERCUT DIAMETER | INCHES MAXIMUM 0.6910 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0570 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MAXIMUM 0.0900 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MAXIMUM 0.5000 |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AHCG | MAXIMUM TEMP RISE | CELSIUS 5.0 |
| AJSL | BODY SIZE | 8 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 11.8 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 800.0 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES MAXIMUM 43.0 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | MILLIWATTS MAXIMUM 120.0 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 72.00 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 82.00 |
| AJTA | ZRS RESISTANCE IN OHMS | NOMINAL 81.00 |
| AJTC | ZSS RESISTANCE IN OHMS | NOMINAL 101.00 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 61.00 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 49.50 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 10.500 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 30.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0 TO 7.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS MAXIMUM 3.0 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS MAXIMUM 9.0 |
| AJWE | SHAFT RADIAL PLAY TEST POINT | INCHES MAXIMUM 0.250 |
| AJWG | SHAFT MAXIMUM RADIAL PLAY | INCHES 0.0008 |
| AJWH | SHAFT END PLAY | INCHES MINIMUM 0.0003 AND INCHES MAXIMUM 0.0015 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0430 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.2410 |
| AJXB | SHAFT MAXIMUM RUNOUT | INCHES 0.0010 |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 270.00 |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES MAXIMUM 0.0350 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 342.00 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES MAXIMUM 0.0300 |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | NOMINAL 27.00 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| CSFG | PLUS J ZSS REACTANCE IN OHMS | NOMINAL 37.00 |
| CSJY | TRANSFORMATION RATIO | STATOR TO ROTOR NOMINAL 1.022 |
| CWXK | SHAFT RADIAL PLAY DETERMINING WEIGHT | OUNCES 4.0 |
| CWYF | SHAFT END PLAY DETERMINING WEIGHT | OUNCES 8.0 |
| MATT | MATERIAL | BODY ALUMINUM |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 7 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 145730 | 35351 |
| CM41005009 | 88818 |
| CM41005009 | 05088 |