NSN 5990-01-114-4270 · NIIN 011144270 · FSC 5990
NO DASHES 5990011144270
In Stock
SYNCHRO,TRANSMITTER
Synchros and Resolvers
Technical characteristics
39 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.6245 AND INCHES MAXIMUM 0.6250 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.6540 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.0610 AND INCHES MAXIMUM 1.0620 |
| ABKU | FLANGE THICKNESS | INCHES MINIMUM 0.0880 AND INCHES MAXIMUM 0.0980 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.9995 AND INCHES MAXIMUM 1.0000 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0450 AND INCHES MAXIMUM 0.0550 |
| ABWV | SHAFT DIAMETER | REAR SHAFT INCHES MINIMUM 0.1195 AND INCHES MAXIMUM 0.1200 |
| ABWV | SHAFT DIAMETER | FRONT SHAFT INCHES MINIMUM 0.1195 AND INCHES MAXIMUM 0.1200 |
| ABXF | SHAFT LENGTH | REAR SHAFT INCHES NOMINAL 0.5000 |
| ABXF | SHAFT LENGTH | FRONT SHAFT INCHES MINIMUM 0.4900 AND INCHES MAXIMUM 0.5100 |
| AJSL | BODY SIZE | 11 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 26.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 240.0 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 920.0 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 16.00 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 3.70 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 8.50 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 3.00 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 5.000 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | INPUT 30.00 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS MAXIMUM 16.0 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS MAXIMUM 4.0 |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | MILLIMETER-MILLIGRAMS NOMINAL 5700.0 |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.6000 |
| CQRG | BODY MATERIAL | ALUMINUM |
| CQTM | TERMINAL LOCATION | REAR |
| CQZS | SHAFT SLOT DEPTH | FRONT SHAFT INCHES MINIMUM 0.0220 AND INCHES MAXIMUM 0.0320 |
| CQZS | SHAFT SLOT DEPTH | REAR SHAFT INCHES MINIMUM 0.0220 AND INCHES MAXIMUM 0.0320 |
| CRHN | SHAFT SLOT WIDTH | REAR SHAFT INCHES MINIMUM 0.0220 AND INCHES MAXIMUM 0.0320 |
| CRHN | SHAFT SLOT WIDTH | FRONT SHAFT INCHES MINIMUM 0.0220 AND INCHES MAXIMUM 0.0320 |
| CRSJ | SHAFT TYPE | REAR SHAFT ROUND, SLOTTED |
| CRSJ | SHAFT TYPE | FRONT SHAFT ROUND, SLOTTED |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES MAXIMUM 0.0700 |
| CSJY | TRANSFORMATION RATIO | STATOR TO ROTOR NOMINAL 0.450 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES NOMINAL 1.6240 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 45-4123-10-02 | 99932 |
| TGH-11-RHVS-4/B858 | 99932 |