NSN 5990-01-121-1175 · NIIN 011211175 · FSC 5990
NO DASHES 5990011211175
In Stock
SYNCHRO,DIFFERENTIAL RECEIVER
Synchros and Resolvers
Technical characteristics
45 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MAXIMUM 2.7000 |
| AAVL | PILOT DIAMETER | INCHES NOMINAL 0.5000 |
| AAZW | SECOND SHOULDER DIAMETER | INCHES NOMINAL 2.7500 |
| AAZX | SECOND SHOULDER LENGTH | INCHES NOMINAL 0.3750 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 5.3600 |
| ABKK | FLANGE DIAMETER | INCHES MAXIMUM 3.1000 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.2500 |
| ABPM | BODY DIAMETER | INCHES MAXIMUM 2.7000 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.6450 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MAXIMUM 0.2405 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.7000 |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJSL | BODY SIZE | 31 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 90.0 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES MAXIMUM 748.0 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | WATTS MAXIMUM 7.8 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 60.0 |
| AJVF | PHASE SHIFT ANGLE IN DEG | OUTPUT TO INPUT MAXIMUM 6.500 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -10.0 TO 10.0 |
| AJVM | SPLINE TOOTH QUANTITY | 22 |
| AJVN | RECEIVER ERROR ANGULAR RANGE IN MINUTES | -48.0 TO 48.0 |
| AJWG | SHAFT MAXIMUM RADIAL PLAY | INCHES 0.0008 |
| AJWH | SHAFT END PLAY | INCHES MINIMUM 0.0010 AND INCHES MAXIMUM 0.0050 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0300 |
| AJWV | AFT OF FIRST FLANGE DIAMETER | INCHES NOMINAL 2.3220 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 4.6600 |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 96 |
| AJXB | SHAFT MAXIMUM RUNOUT | INCHES 0.0008 |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | SINGLE SHAFT UNF |
| AKAF | SHAFT THREAD DIRECTION | SINGLE SHAFT RIGHT-HAND |
| AKAN | SHAFT THREAD CLASS | 2A |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| CQTM | TERMINAL LOCATION | REAR |
| CQWQ | SHAFT THREAD LENGTH | SINGLE SHAFT INCHES MAXIMUM 0.3200 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT SPLINE W/THREADS |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 1.154 |
| CWBH | SHAFT NOMINAL THREAD SIZE | SINGLE SHAFT INCHES 0.250 |
| CWXK | SHAFT RADIAL PLAY DETERMINING WEIGHT | OUNCES 16.0 |
| CWYF | SHAFT END PLAY DETERMINING WEIGHT | OUNCES 16.0 |
| FEAT | SPECIAL FEATURES | SHAFT RADIAL PLAY TEST POINT 0.125 INCHES MAX |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-S-20708 |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 6 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-S-20708 TO 67 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 31TDR6B | 81349 |
| MIL-S-20708/67 | 81349 |
| MIL-S-20708 | 81349 |
| M20708/67-01B | 0U583 |
| SAE-AS20708/67 | 0U583 |