NSN 5990-01-168-3257 · NIIN 011683257 · FSC 5990
NO DASHES 5990011683257
In Stock
SYNCHRO,RECEIVER-TRANSMITTER
Synchros and Resolvers
Technical characteristics
46 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES NOMINAL 2.7000 |
| AAVL | PILOT DIAMETER | INCHES NOMINAL 0.5000 |
| AAZW | SECOND SHOULDER DIAMETER | INCHES NOMINAL 2.7500 |
| AAZX | SECOND SHOULDER LENGTH | INCHES NOMINAL 0.3750 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 5.1800 |
| ABKK | FLANGE DIAMETER | INCHES NOMINAL 3.1000 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.2500 |
| ABPM | BODY DIAMETER | INCHES MAXIMUM 2.7000 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.6950 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES NOMINAL 0.2405 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.7300 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJSL | BODY SIZE | 31 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | MINIMUM 90.0 AND MAXIMUM 115.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 60.0 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES MAXIMUM 440.0 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | WATTS NOMINAL 6.6 |
| AJTN | ZSS IMPEDANCE MAGNITUDE IN OHMS | NOMINAL 28.50 |
| AJTP | ZSS IMPEDANCE ANGLE IN DEG | NOMINAL 20.00 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 28.00 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 117.00 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 6.500 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | OUTPUT 35.00 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 170.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -10.0 TO 10.0 |
| AJVM | SPLINE TOOTH QUANTITY | 22 |
| AJVN | RECEIVER ERROR ANGULAR RANGE IN MINUTES | -36.0 TO 36.0 |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | INCH-OUNCES NOMINAL 0.400 |
| AJWH | SHAFT END PLAY | INCHES MINIMUM 0.0010 AND INCHES MAXIMUM 0.0050 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0300 |
| AJWV | AFT OF FIRST FLANGE DIAMETER | INCHES NOMINAL 2.7500 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES NOMINAL 4.4500 |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 96 |
| AJXB | SHAFT MAXIMUM RUNOUT | INCHES 0.0008 |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | SINGLE SHAFT UNF |
| AKAF | SHAFT THREAD DIRECTION | SINGLE SHAFT RIGHT-HAND |
| AKAN | SHAFT THREAD CLASS | 2A |
| CQTM | TERMINAL LOCATION | REAR |
| CQWQ | SHAFT THREAD LENGTH | SINGLE SHAFT INCHES NOMINAL 0.3400 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT SPLINE W/THREADS |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 0.783 |
| CWBH | SHAFT NOMINAL THREAD SIZE | SINGLE SHAFT INCHES 0.250 |
| CWYF | SHAFT END PLAY DETERMINING WEIGHT | OUNCES 16.0 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 5 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| VTRX31-6N1 | 10112 |
| G260278-1 | 10112 |