NSN 5990-01-240-7288 · NIIN 012407288 · FSC 5990
NO DASHES 5990012407288
In Stock
RESOLVER,ELECTRICAL
Synchros and Resolvers
Technical characteristics
42 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.4995 AND INCHES MAXIMUM 0.5000 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 1.7400 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 0.7490 AND INCHES MAXIMUM 0.7500 |
| ABKU | FLANGE THICKNESS | INCHES MINIMUM 0.0590 AND INCHES MAXIMUM 0.0650 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.6880 AND INCHES MAXIMUM 0.6910 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0590 AND INCHES MAXIMUM 0.0650 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1195 AND INCHES MAXIMUM 0.1200 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.4610 |
| AJSL | BODY SIZE | 8 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 28.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 26.4 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 220.0 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 310.00 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 278.00 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 246.00 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 217.00 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 13.600 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | INPUT 30.00 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 30.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0 TO 7.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS MAXIMUM 9.00 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS MAXIMUM 3.00 |
| AJVW | ALIGNMENT HOLE QUANTITY | 2 |
| AJWG | SHAFT MAXIMUM RADIAL PLAY | INCHES 0.0005 |
| AJWH | SHAFT END PLAY | INCHES MINIMUM 0.0003 AND INCHES MAXIMUM 0.0008 |
| AJWQ | PILOT LENGTH | INCHES MINIMUM 0.0390 AND INCHES MAXIMUM 0.0430 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.2400 |
| AJXB | SHAFT MAXIMUM RUNOUT | INCHES 0.0010 |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 1022.00 |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES NOMINAL 0.0250 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 958.00 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES NOMINAL 0.0200 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES MINIMUM 0.0500 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES MINIMUM 0.5670 AND INCHES MAXIMUM 0.5730 |
| CWXK | SHAFT RADIAL PLAY DETERMINING WEIGHT | OUNCES 4.0 |
| CWYF | SHAFT END PLAY DETERMINING WEIGHT | OUNCES 8.0 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 7 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 3563082-0033 | 55972 |