NSN 5990-01-362-4011 · NIIN 013624011 · FSC 5990
NO DASHES 5990013624011
In Stock
SYNCHRO,RECEIVER
Synchros and Resolvers
Technical characteristics
43 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.8118 AND INCHES MAXIMUM 0.8123 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.4995 AND INCHES MAXIMUM 0.5000 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 1.6540 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 0.9360 AND INCHES MAXIMUM 0.9370 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0380 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 0.8400 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.0620 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.0895 AND INCHES MAXIMUM 0.0900 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.3370 |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | |
| AHCG | MAXIMUM TEMP RISE | CELSIUS 125.0 |
| AJSL | BODY SIZE | 10 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 26.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJST | ROTOR INPUT CURRENT RATING | AMPERES NOMINAL 0.234 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | WATTS NOMINAL 0.997 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 18.20 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 4.90 |
| AJTA | ZRS RESISTANCE IN OHMS | NOMINAL 32.40 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 11.50 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | MILLIMETER-MILLIGRAMS MAXIMUM 5400.0 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | MILLIMETER-MILLIGRAMS MAXIMUM 2700.0 |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | MILLIMETER-MILLIGRAMS NOMINAL 5000.0 |
| AJVW | ALIGNMENT HOLE QUANTITY | 3 |
| AJWG | SHAFT MAXIMUM RADIAL PLAY | INCHES 0.0010 |
| AJWH | SHAFT END PLAY | INCHES MINIMUM 0.0020 AND INCHES MAXIMUM 0.0050 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0380 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES NOMINAL 1.2410 |
| AJXB | SHAFT MAXIMUM RUNOUT | INCHES 0.0010 |
| AKEJ | MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| CQRG | BODY MATERIAL | ALUMINUM |
| CQTM | TERMINAL LOCATION | REAR |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 19.40 |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | NOMINAL 10.90 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, FLAT, UNDERCUT |
| CRYY | MOUNTING FACILITY NOMINAL SCREW THREAD DIAMETER | INCHES 0.073 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 0.454 |
| CTBP | SHAFT TIP LENGTH | SINGLE SHAFT INCHES MAXIMUM 0.0200 |
| CTJK | SHAFT FLATTED PORTION THICKNESS | SINGLE SHAFT INCHES MINIMUM 0.0830 AND INCHES MAXIMUM 0.0870 |
| CWFM | SHAFT FLATTED PORTION LENGTH | SINGLE SHAFT INCHES MINIMUM 0.1240 AND INCHES MAXIMUM 0.1260 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 100-8-015 | 58880 |
| CRH-1-AS-06/F595 | 99932 |