NSN 3010-00-783-7037 · NIIN 007837037 · FSC 3010
NO DASHES 3010007837037
In Stock
GEARCASE-MOTOR
Torque Converters and Speed Changers
Technical characteristics
33 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJT | OVERALL HEIGHT | INCHES 1.375 |
| AAJU | OVERALL LENGTH | INCHES 3.938 |
| AAJV | OVERALL WIDTH | INCHES 1.375 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES MINIMUM 0.749 AND INCHES MAXIMUM 0.759 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 0.812 |
| AKAE | MAXIMUM OPERATING ALTITUDE RATING | FEET 10000.0 |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE OR COUNTERCLOCKWISE |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | ENCLOSURE FEATURE | TOTALLY ENCLOSED |
| BFLY | GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | SINGLE END INLINE W/ARMATURE |
| BFMF | COOLING METHOD | NONVENTILATED |
| BKPB | CURRENT RATING METHOD | LOAD |
| BKPH | TORQUE RATING AND TYPE | INCH-OUNCES RUNNING 3.0 |
| BKPP | SPEED CONTROL METHOD AND DEVICE TYPE | ELECTRICAL MECHANICAL |
| CWHK | GEARED HEAD OUTPUT SHAFT SPEED RATING | SINGLE END SINGLE REVOLUTIONS PER MINUTE 0.195 |
| CWHR | ANGLE OF SHAFT TO MOUNTING BASE | SINGLE END DEGREES 90.0 |
| CWGD | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | INCHES 0.812 |
| CWGL | CURRENT RATING IN AMPS | OUTPUT SINGLE 0.100 |
| ACDC | CURRENT TYPE | INPUT AC |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END SINGLE STYLE A1 |
| FAAZ | PHASE | INPUT THREE |
| FEAT | SPECIAL FEATURES | STYLE3B AS DESCRIBED HAS SMALL SHOULDER AT FLANGED END NEXT TO OUTPUT SHAFT AND NO EXTENDED EAR |
| FREQ | FREQUENCY IN HERTZ | 400.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 3 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 115.0 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 0.500 |
| CWDY | TEMP RATING | OPERATING CELSIUS -40.0 AND OPERATING CELSIUS 71.0 |
| CWFQ | MOUNTING FACILITY CIRCLE DIAMETER | INCHES 0.406 |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| CBBL | FEATURES PROVIDED | VERTICAL MOUNTING POSITION AND HORIZONTAL MOUNTING POSITION |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 4 |
| AXCP | WINDING TYPE | SYNCHRONOUS |
| AXGY | MOUNTING METHOD | FLANGE |