NSN 6105-00-519-1805 · NIIN 005191805 · FSC 6105
NO DASHES 6105005191805
In Stock
MOTOR,DIRECT CURRENT
Motors, Electrical
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASA | THREAD LENGTH | SINGLE END INCHES NOMINAL 0.5625 |
| CWGL | CURRENT RATING IN AMPS | INPUT SINGLE 3.500 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 6.093 |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | SINGLE END INCHES 3.500 |
| BFMF | COOLING METHOD | AMBIENT AIR |
| BKPB | CURRENT RATING METHOD | LOAD |
| BKPQ | INCLOSURE SPECIFICATION | MIL-STD-108 |
| CBBL | FEATURES PROVIDED | VERTICAL MOUNTING POSITION |
| FEAT | SPECIAL FEATURES | LH THREAD ON ARMATURE SHAFT |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 0.2500 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE FULL LOAD 1725.0 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES MINIMUM 0.562 AND INCHES MAXIMUM 0.875 |
| AAJU | OVERALL LENGTH | INCHES 17.593 |
| AAJV | OVERALL WIDTH | INCHES 6.656 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL---17556 |
| CQJX | NOMINAL THREAD SIZE | SINGLE END INCHES 0.500 |
| ANPZ | ENCLOSURE FEATURE | SPRAY TIGHT |
| AXCP | WINDING TYPE | COMPOUND WOUND |
| AXGY | MOUNTING METHOD | FIXED BASE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 4 |
| ABGH | STEP DIAMETER | SINGLE END INCHES MINIMUM 0.562 AND INCHES MAXIMUM 0.750 |
| THSD | THREAD SERIES DESIGNATOR | SINGLE END UNF |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE OR COUNTERCLOCKWISE |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES 3.000 |
| CWDY | TEMP RATING | AMBIENT CELSIUS 50.0 AND OPERATING CELSIUS 50.0 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 115.0 |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END FIRST STYLE A2 AND SECOND STYLE A9 AND THIRD STYLE A11 |
| AKPS | DUTY CYCLE | CONTINUOUS |
| AAJT | OVERALL HEIGHT | INCHES 6.500 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 4.875 |