NSN 5305-00-941-3620 · NIIN 009413620 · FSC 5305
NO DASHES 5305009413620
In Stock
SCREW,CAP,HEXAGON HEAD
Screws
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASA | THREAD LENGTH | INCHES MAXIMUM 0.625 |
| BQDM | HOLE TYPE | DRILLED |
| CRHC | HOLE CONFIGURATION STYLE | |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.594 AND INCHES MAXIMUM 0.625 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 25.0 AND ROCKWELL C MAXIMUM 34.0 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 120000 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CSYM | SURFACE FINISH | THREADS MICROINCHES 63.0 |
| MATT | MATERIAL | OVERALL STEEL |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| ASXK | HOLE QUANTITY | 1 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE SAE GR 5 |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE 2 AND STYLE 10 AND GRADE 5 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.150 AND INCHES MAXIMUM 0.163 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.428 AND INCHES MAXIMUM 0.438 |
| AAUB | HOLE DIAMETER | INCHES NOMINAL 0.062 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--4156 TY 2 CL 2 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| AAJD | THREAD CLASS | 2A |
Supersedes
This item replaces cancelled NIIN 006383116. An older drawing citing one of those numbers resolves here.