NSN 6105-00-421-7731 · NIIN 004217731 · FSC 6105
NO DASHES 6105004217731
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CBBL | FEATURES PROVIDED | VERTICAL MOUNTING POSITION |
| ANPZ | ENCLOSURE FEATURE | DRIPPROOF-15 DEG |
| BTBY | SHAFT END STYLE | |
| BFMF | COOLING METHOD | NATURAL CONVECTION VENTILATED |
| BKPQ | INCLOSURE SPECIFICATION | MIL-STD-108 |
| AXCP | WINDING TYPE | INDUCTION-SQUIRREL CAGE |
| AXGY | MOUNTING METHOD | FACE |
| AAJU | OVERALL LENGTH | INCHES 18.187 |
| AAJV | OVERALL WIDTH | INCHES 9.500 |
| AASA | THREAD LENGTH | SINGLE END INCHES NOMINAL 0.7500 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL---1940 |
| THSD | THREAD SERIES DESIGNATOR | SINGLE END UNF |
| TTQY | TERMINAL TYPE AND QUANTITY | SOLDER LUG 3 |
| CWFQ | MOUNTING FACILITY CIRCLE DIAMETER | INCHES 6.250 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE FULL LOAD 3430.0 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 440.0 |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END FIRST STYLE A2 AND SECOND STYLE A9 AND THIRD STYLE A12 |
| FAAZ | PHASE | INPUT THREE |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| AAJT | OVERALL HEIGHT | INCHES 12.750 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 7.187 |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | THREADED HOLE(S) 4 |
| ABGH | STEP DIAMETER | SINGLE END INCHES NOMINAL 0.6250 |
| ABGJ | STEP LENGTH | SINGLE END INCHES NOMINAL 3.4375 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES MINIMUM 0.625 AND INCHES MAXIMUM 0.750 |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE OR COUNTERCLOCKWISE |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 1.2500 |
| CQJX | NOMINAL THREAD SIZE | SINGLE END INCHES 0.500 |
| CWDY | TEMP RATING | OPERATING CELSIUS 50.0 AND AMBIENT CELSIUS 40.0 |
| AKPS | DUTY CYCLE | CONTINUOUS |