NSN 6105-01-019-0654 · NIIN 010190654 · FSC 6105
NO DASHES 6105010190654
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Technical characteristics
37 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJT | OVERALL HEIGHT | INCHES 14.510 |
| AAJU | OVERALL LENGTH | INCHES 25.230 |
| AAJV | OVERALL WIDTH | INCHES 15.240 |
| AASA | THREAD LENGTH | SINGLE END INCHES MINIMUM 0.610 AND INCHES MAXIMUM 0.640 |
| ABGH | STEP DIAMETER | SINGLE END INCHES MINIMUM 1.374 AND INCHES MAXIMUM 1.375 |
| ABGJ | STEP LENGTH | SINGLE END INCHES NOMINAL 3.5000 |
| ABRR | KEYWAY WIDTH | SINGLE END INCHES MINIMUM 0.250 AND INCHES MAXIMUM 0.252 |
| ABRV | KEYWAY DEPTH | SINGLE END INCHES MINIMUM 0.125 AND INCHES MAXIMUM 0.126 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 0.875 |
| AFYS | KEYWAY LENGTH | SINGLE END INCHES NOMINAL 1.6200 |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | ENCLOSURE FEATURE | TOTALLY ENCLOSED |
| AXCP | WINDING TYPE | INDUCTION-SQUIRREL CAGE |
| AXGY | MOUNTING METHOD | FIXED BASE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 4 |
| BFMF | COOLING METHOD | FAN COOLED |
| BKPB | CURRENT RATING METHOD | LOAD |
| BKPQ | INCLOSURE SPECIFICATION | NEMA |
| BTBY | SHAFT END STYLE | |
| CBBL | FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION |
| CNMM | FRAME SIZE DESIGNATION | 215TNCZ |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 7.5000 |
| CQJX | NOMINAL THREAD SIZE | SINGLE END INCHES 0.875 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 8.250 |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | SINGLE END INCHES 5.235 |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES 7.000 |
| CWDY | TEMP RATING | OPERATING CELSIUS 50.0 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE NO LOAD 1800.0 AND SINGLE FULL LOAD 1745.0 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 8.500 |
| CWGL | CURRENT RATING IN AMPS | INPUT SINGLE 11.000 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 440.0 |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END FIRST STYLE A2 AND SECOND STYLE A9 AND THIRD STYLE A12 |
| FAAZ | PHASE | INPUT THREE |
| FEAT | SPECIAL FEATURES | SECOND STYLE SHAFT DIA 1.249 IN.; THIRD STYLE SHAFT DIA 1.749 IN. MIN AND 1.750 IN. MAX |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| THSD | THREAD SERIES DESIGNATOR | SINGLE END UNF |
Supersedes
This item replaces cancelled NIIN 013641723. An older drawing citing one of those numbers resolves here.