NSN 5990-00-677-6483 · NIIN 006776483 · FSC 5990
NO DASHES 5990006776483
In Stock
SYNCHRO,CONTROL TRANSFORMER
Synchros and Resolvers
Technical characteristics
39 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJYY | SHAFT THREAD SERIES DESIGNATOR | SINGLE SHAFT UNF |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 0.735 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES NOMINAL 1.0750 |
| CWBH | SHAFT NOMINAL THREAD SIZE | SINGLE SHAFT INCHES 0.190 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 5 |
| AJVM | SPLINE TOOTH QUANTITY | 21 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 0.1 |
| AJTJ | ZSO IMPEDANCE MAGNITUDE IN OHMS | MINIMUM 4600.00 AND MAXIMUM 5800.00 |
| AJTK | ZSO IMPEDANCE ANGLE IN DEG | MINIMUM 70.00 AND MAXIMUM 76.00 |
| AJTL | ZRS IMPEDANCE MAGNITUDE IN OHMS | MINIMUM 1600.00 AND MAXIMUM 2050.00 |
| AJTM | ZRS IMPEDANCE ANGLE IN DEG | MINIMUM 14.50 AND MAXIMUM 18.00 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.1325 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 16.000 |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 120 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 3.0600 |
| AKAF | SHAFT THREAD DIRECTION | SINGLE SHAFT RIGHT-HAND |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0937 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT SPLINE W/THREADS |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES NOMINAL 0.1250 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 115.0 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 20.0 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 360.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 60.0 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES NOMINAL 0.1875 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.5000 |
| AHCG | MAXIMUM TEMP RISE | CELSIUS 10.0 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0400 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES NOMINAL 2.3880 |
| AKAN | SHAFT THREAD CLASS | 2A |
| CQTM | TERMINAL LOCATION | REAR |
| CQWQ | SHAFT THREAD LENGTH | SINGLE SHAFT INCHES NOMINAL 0.2000 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -6.0 TO 6.0 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES NOMINAL 1.5625 |
| AAVL | PILOT DIAMETER | INCHES NOMINAL 0.9370 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0785 |
| ABKK | FLANGE DIAMETER | INCHES NOMINAL 1.7500 |
| AJSL | BODY SIZE | 18 |
Supersedes
This item replaces cancelled NIINs 008178457 · 008573032. An older drawing citing one of those numbers resolves here.