NSN 5990-00-556-9851 · NIIN 005569851 · FSC 5990
NO DASHES 5990005569851
In Stock
SYNCHRO,DIFFERENTIAL TRANSMITTER
Synchros and Resolvers
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.9900 |
| AGRS | DISTANCE BETWEEN FLANGES | INCHES NOMINAL 1.8120 |
| AAVL | PILOT DIAMETER | INCHES NOMINAL 1.3200 |
| AAVH | SHOULDER DIAMETER | INCHES NOMINAL 3.3590 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.1600 |
| AJSP | STATOR INPUT CURRENT RATING | AMPERES MAXIMUM 1.0 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | WATTS MAXIMUM 15.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 60.0 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -18.0 TO 18.0 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 1.0300 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, THREADED |
| AAQL | BODY STYLE | |
| CQTM | TERMINAL LOCATION | REAR |
| AHCG | MAXIMUM TEMP RISE | CELSIUS 50.0 |
| AJSL | BODY SIZE | 37 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 90.0 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.2500 |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | INCH-OUNCES MINIMUM 0.300 |
| CQWQ | SHAFT THREAD LENGTH | SINGLE SHAFT INCHES NOMINAL 0.1800 |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES NOMINAL 0.0460 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES NOMINAL 0.0310 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 6.3600 |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | SINGLE SHAFT UNF |
| AKAF | SHAFT THREAD DIRECTION | SINGLE SHAFT RIGHT-HAND |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.2480 AND INCHES MAXIMUM 0.2500 |
| CWBH | SHAFT NOMINAL THREAD SIZE | SINGLE SHAFT INCHES 0.250 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-S-22335 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 6 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 3.6230 AND INCHES MAXIMUM 3.6250 |
| AKAN | SHAFT THREAD CLASS | 3A |
| CQRG | BODY MATERIAL | ALUMINUM |