NSN 5990-00-827-0684 · NIIN 008270684 · FSC 5990
NO DASHES 5990008270684
In Stock
SYNCHRO,RECEIVER
Synchros and Resolvers
Technical characteristics
33 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1195 AND INCHES MAXIMUM 0.1200 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0500 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.9995 AND INCHES MAXIMUM 1.0000 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.0570 AND INCHES MAXIMUM 1.0650 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0930 |
| AJTG | ZRO IMPEDANCE MAGNITUDE IN OHMS | NOMINAL 107.00 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES NOMINAL 0.9750 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.6245 AND INCHES MAXIMUM 0.6250 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 2.2240 AND INCHES MAXIMUM 2.2500 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 9.00 |
| CQTM | TERMINAL LOCATION | REAR |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MINIMUM 0.3620 AND INCHES MAXIMUM 0.3880 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0620 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES NOMINAL 1.7960 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.0620 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 280.0 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES NOMINAL 0.0250 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR MINIMUM 0.454 |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 5 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 3.00 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 910.0 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -15.0 TO 15.0 |
| AJTJ | ZSO IMPEDANCE MAGNITUDE IN OHMS | NOMINAL 18.10 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 5.000 |
| AJSL | BODY SIZE | 11 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 26.0 |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| AJTK | ZSO IMPEDANCE ANGLE IN DEG | NOMINAL 79.50 |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES NOMINAL 0.0300 |
| AJTH | ZRO IMPEDANCE ANGLE IN DEG | NOMINAL 81.70 |