NSN 6020-01-722-4909 · NIIN 017224909 · FSC 6020
NO DASHES 6020017224909
In Stock
CABLE ASSEMBLY,FIBER OPTIC
Fiber Optic Cable Assemblies and Harnesses
Application: AN-SLQ32X(V)
Technical characteristics
5 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| FEAT | SPECIAL FEATURES | MARK I/A/W MIL-STD-130 AND SAE-AS81531, CONTRASTING COLOR, CHARACTERS .10 MINIMUM HIGH, PRIOR TO SHRINKING (OR .05 MINIMUM HIGH AFTER SHRINKING); MARKER SHALL BE LONGER THAN THE SPECIFIED MARKING, BY A MINIMUM OF 1 CHARACTER WIDTH, ON EACH SIDE OF THE MARKING; AN ACCEPTABLE ALTERNATE PART FOR FN 6 IS OKWOO*PVF225194WE2.5; IF ALTERNATE PART IS USED, MARKER SHALL BE OF SUFFICIENT LENGTH TO WRAP CABLE AND OVERLAP ITSELF BY APPROXIMATELY HALF THE CIRCUMFERENCE OF THE CABLE; ALL SPARE CONNECTOR CAVITIES SHALL BE POPULATED WITH DUMMY TERMINI FN 3; WHEN APPLYING HEAT TO THE INSULATION SLEEVING, DO NOT OVERHEAT THE OFCC; PROLONGED EXPOSURE OF THE OFCC TO TEMPERATURES ABOVE 160 DEGREES CELSIUS MAY DAMAGE THE OFCC JACKET; DISCONTINUE HEATING OF THE TUBING AND ALLOW THE JACKET TO COOL BEFORE REHEATING IF THE JACKET SHOWS SIGNS OF BUBBLING; COVER FN 7 WITH FN 6 OVERLAPPING FN 5 BY APPROXIMATELY .25-.50" |
| SPCL | SPECIAL TEST FEATURES | USE FN 8 TO BUILD UP CABLE DIAMETER UNDER FN 6 PRIOR TO SHRINKING; USE FN 8 TO BUILD UP CABLE DIAMETER UNDER BACKSHELL/CABLE CLAMP, TO ENSURE PROPER STRAIN RELIEF; AFTER ASSEMBLY THE CABLE SHALL BE TESTED FOR OPTICAL LOSS I/A/W EIA-455-171, (FOTP-171); OPTICAL LOSS SHALL NOT EXCEED 1.0DB AT 1550 NANOMETERS; ENSURE 29504 TERMINI ARE TESTED VIA INTERFEROMETER AND MEET REQUIREMENTS OUTLINED IN DEPARTMENT OF THE NAVY GUIDANCE DOCUMENT: METHOD TO MEASURE FERRULE END FACES, FIBER OPTIC CONNECTORS AND TERMINI (SER NUMBER 96315/067 DATED OCTOBER 31, 2003) |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | CABLE ASSEMBLY, FIBER OPTIC |
| AAJU | OVERALL LENGTH | INCHES 81.00 |
| AGAV | END ITEM IDENTIFICATION | AN-SLQ32X(V) |