NSN 3020-00-253-4334 · NIIN 002534334 · FSC 3020
NO DASHES 3020002534334
In Stock
GEAR,BEVEL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | AXIALLY THROUGH BODY SECOND END COUNTERBORED 12 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 10.6560 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 1.2660 |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQD | PITCH ANGLE | DEGREES 66.7998 |
| CWRM | FACE NOMINAL WIDTH | INCHES 1.2500 |
| STYL | STYLE DESIGNATOR | |
| MATT | MATERIAL | OVERALL STEEL COMP 4027 OR STEEL COMP 8620 |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 10.5000 |
| AJLA | TEETH QUANTITY | 42 |
| ANTP | BORE STYLE | |
| CBBL | FEATURES PROVIDED | STRAIGHT TEETH |
| CQFM | HARDNESS RATING | TEETH ROCKWELL C MINIMUM 52.1 AND ROCKWELL C MAXIMUM 61.8 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 5.4388 |
| CWZK | MOUNTING HOLE NOMINAL DIAMETER | AXIALLY THROUGH BODY SECOND END INCHES 0.4060 |
| CWZN | BOLT HOLE CIRCLE NOMINAL DIAMETER | AXIALLY THROUGH BODY SECOND END INCHES 6.7500 |
| FEAT | SPECIAL FEATURES | 1/8 IN. BY 45.0 DEG CHAMFERED ON BORE,BACK SIDE OF GEAR |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE MATERIAL RESPONSE 66 OR FED SPEC SINGLE MATERIAL RESPONSE QQ-S-624-CANCELED |
Supersedes
This item replaces cancelled NIIN 007005122. An older drawing citing one of those numbers resolves here.