NSN 6105-00-707-4903 · NIIN 007074903 · FSC 6105
NO DASHES 6105007074903
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Technical characteristics
36 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJV | OVERALL WIDTH | INCHES 11.250 |
| AAJT | OVERALL HEIGHT | INCHES 13.500 |
| AAJU | OVERALL LENGTH | INCHES 17.250 |
| CWHZ | SHAFT END CHARACTERISTIC | SECOND END SINGLE STYLE A9 |
| FAAZ | PHASE | INPUT THREE |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| AKPS | DUTY CYCLE | INTERMITTENT |
| ANPZ | ENCLOSURE FEATURE | OPEN PROTECTED |
| AXCP | WINDING TYPE | INDUCTION-SQUIRREL CAGE |
| AXGY | MOUNTING METHOD | FIXED BASE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 4 |
| BFLT | TIME INTERVAL | MINUTES MAXIMUM ON 30.0 |
| BFMF | COOLING METHOD | NATURAL CONVECTION VENTILATED |
| BKPB | CURRENT RATING METHOD | LOAD |
| ABRR | KEYWAY WIDTH | SECOND END INCHES NOMINAL 0.250 |
| ABRV | KEYWAY DEPTH | SECOND END INCHES NOMINAL 0.013 |
| ABWV | SHAFT DIAMETER | FIRST END INCHES NOMINAL 0.750 |
| ABWV | SHAFT DIAMETER | SECOND END INCHES NOMINAL 1.000 |
| ABXQ | FLATTED PORTION LENGTH | FIRST END INCHES NOMINAL 1.000 |
| AFYS | KEYWAY LENGTH | SECOND END INCHES NOMINAL 2.000 |
| AGRB | FLAT DEPTH | SINGLE END INCHES NOMINAL 0.125 |
| AKCT | SHAFT ROTATION DIRECTION | FIRST END CLOCKWISE |
| AKCT | SHAFT ROTATION DIRECTION | SECOND END COUNTERCLOCKWISE |
| CWHZ | SHAFT END CHARACTERISTIC | FIRST END SINGLE STYLE A5 |
| CWGL | CURRENT RATING IN AMPS | INPUT SINGLE 6.000 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 440.0 |
| CWDY | TEMP RATING | OPERATING CELSIUS 40.0 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE FULL LOAD 1750.0 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 9.250 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SECOND END INCHES 2.500 |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | SINGLE END INCHES 5.750 |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES 5.750 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | FIRST END INCHES 1.375 |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| CBBL | FEATURES PROVIDED | VERTICAL MOUNTING POSITION AND INTEGRAL BRAKE AND HORIZONTAL MOUNTING POSITION |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 2.500 |