NSN 5910-00-102-9161 · NIIN 001029161 · FSC 5910
NO DASHES 5910001029161
In Stock
CAPACITOR,FIXED,GLASS DIELECTRIC
Capacitors
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MATT | MATERIAL | CASE CERAMIC |
| PMLC | PRECIOUS MATERIAL AND LOCATION | GOLD TER-INAL SURFACE OR SILVER TER-INAL SURFACE |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 03640-6083542 |
| AAQL | BODY STYLE | |
| CBBL | FEATURES PROVIDED | HERMETICALLY SEALED CASE |
| CQBQ | CAPACITANCE VALUE PER SECTION | PICOFARADS SINGLE SECTION 1000.000 |
| CQJJ | NONDERATED OPERATING TEMP | CELSIUS MINIMUM -55.0 AND CELSIUS MAXIMUM 125.0 |
| CQLZ | TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION 0.0 |
| CWPK | INSULATION RESISTANCE AT REFERENCE TEMP | MEGOHMS 100000.0 |
| ABPM | BODY DIAMETER | INCHES NOMINAL 0.100 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 0.250 |
| AEBT | TERMINAL DIAMETER | INCHES MINIMUM 0.015 AND INCHES MAXIMUM 0.017 |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | |
| CWSG | TERMINAL SURFACE TREATMENT | GOLD OR SILVER |
| CQWM | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | DC SINGLE SECTION 50.0 |
| CRHD | TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -10.0 TO 2.0 |
| CRTP | TOLERANCE RANGE PER SECTION | PERCENT SINGLE SECTION -10.00 TO 10.00 |
| TTQY | TERMINAL TYPE AND QUANTITY | UNINSULATED WIRE LEAD 2 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 1.250 |
| CWPM | DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 1.000 |