NSN 3416-00-869-2345 · NIIN 008692345 · FSC 3416
NO DASHES 3416008692345
In Stock
LATHE,ENGINE
Lathes
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| BTZR | THREAD QUANTITY RANGE | PER INCH 2.0 TO 112.0 |
| ELEC | VOLTAGE IN VOLTS | 460.0 |
| BTYR | CARRIAGE LONGITUDINAL FEED OPERATION METHOD | POWER |
| ZZZX | DEPARTURE FROM CITED DESIGNATOR | ASHK,ELEC,FAAZ |
| ACDC | CURRENT TYPE | AC |
| BTWL | HEADSTOCK DRIVE TYPE | DIRECT PULLEY, BACK GEARED |
| BTYP | HOLE DIAMETER THROUGH SPINDLE | INCHES NOMINAL 2.000 |
| AKSL | PURPOSE FOR WHICH DESIGNED | GENERAL |
| ADQR | CENTER TO CENTER DISTANCE | INCHES NOMINAL 54.000 |
| FAAZ | PHASE | THREE |
| AAXX | MOUNTING TYPE | FLOOR |
| BTTG | SWING OVER CROSS SLIDE | INCHES NOMINAL 10.000 |
| AGLD | PERFORMANCE TYPE | STANDARD DUTY |
| BTTD | RATED SWING | INCHES NOMINAL 16.000 |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | SIZE 1610 |
| AKYD | ACCESSORY COMPONENTS AND QUANTITY | 1 SET ARMSTRONG TOOL HOLDERS,1 CHUCK,4-JAW,12 IN.,1 CHUCK,UNIVERSAL 3-JAW,10 IN.,1 SET COLLECTS,RUBBER FLEX,RANGE 1/16 IN. TO 1-3/8 IN.,1 COLLANT SYSTEM,1 FACEPLATE,15 IN.,1 FOLLOW REST,FLAT JAWS,3/4 IN. TO 3-1/2 IN. CAPACITY,2 HEADSTOCK CENTER,NO. 4 MORSE TAPER,1 HEAVY DUTY DRILL ADAPTER,1 JACOBS SPINDLE NOSE CHUCK,1 SET METRIC TRANSPOSING GEARS,RANGE .0016 TO .1055 MM PER REVOLUTIONS,1 MICROMETER CARRIAGE STOP,1 PIPE CENTER,NO. 4 MORSE TAPER,1 IN. TO 6 IN. CAPACITY,1 STEADY REST,PLAIN JAWS,3/4 IN. TO 4-1/2 IN. CAPACITY,1 4-1/2 1N. TO 8 IN. CAPACITY,1 EA TAILSTOCK,BUILT-IN ANTIFRICTION SPINDLE AND CENTER,1 TAPER ATTACHMENT,1 WORK LIGHT MTG |
| APGF | DESIGN TYPE | SCREW |
| ASHK | ELECTRIC MOTOR HORSEPOWER RATING | 10.0 |
| AWLX | ELECTRIC MOTOR QUANTITY | 1 |
| BTSZ | SPINDLE SPEED QUANTITY | 24 |
| BTTB | SPINDLE SPEED RANGE IN RPM | 23.0 TO 1500.0 |
| BTWB | THREAD CHANGE QUANTITY | 60 |
| BTYS | CARRIAGE CROSS FEED OPERATION METHOD | HAND AND POWER |
| BTYQ | CARRIAGE QUANTITY | 1 |