NSN 5305-00-182-7084 · NIIN 001827084 · FSC 5305
NO DASHES 5305001827084
In Stock
SCREW,EXTERNALLY RELIEVED BODY
Screws
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.307 AND INCHES MAXIMUM 0.317 |
| AAUY | POINT LENGTH | INCHES NOMINAL 0.078 |
| AAVA | POINT DIAMETER | INCHES MINIMUM 0.062 AND INCHES MAXIMUM 0.078 |
| AAWC | FIRST DIAMETER FROM HEAD | INCHES MINIMUM 0.073 AND INCHES MAXIMUM 0.083 |
| AAWH | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | INCHES MINIMUM 0.349 AND INCHES MAXIMUM 0.369 |
| ABQJ | POINT STYLE | |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.112 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.307 AND INCHES MAXIMUM 0.317 |
| AASK | HEAD STYLE | |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.120 AND INCHES MAXIMUM 0.130 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.547 AND INCHES MAXIMUM 0.578 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-W-52263 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| MATT | MATERIAL | OVERALL STEEL CORROSION RESISTING |
| AAJD | THREAD CLASS | 2A |
| CSNG | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 1 |
| CWDK | POINT CHAMFER ANGLE | DEGREES MINIMUM 85.0 AND DEGREES MAXIMUM 95.0 |
| CMLP | THREAD QUANTITY PER INCH | 40 |
Supersedes
This item replaces cancelled NIIN 006302734. An older drawing citing one of those numbers resolves here.