NSN 6105-00-020-3583 · NIIN 000203583 · FSC 6105
NO DASHES 6105000203583
In Stock
MOTOR,DIRECT CURRENT
Motors, Electrical
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJT | OVERALL HEIGHT | INCHES 1.813 |
| AAJU | OVERALL LENGTH | INCHES 4.812 |
| AAJV | OVERALL WIDTH | INCHES 1.656 |
| AXCP | WINDING TYPE | SERIES WOUND |
| AXGY | MOUNTING METHOD | END BELL |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 6 |
| BFLT | TIME INTERVAL | MINUTES MAXIMUM ON 1.0 AND MINUTES MINIMUM OFF 19.0 |
| BFMF | COOLING METHOD | AMBIENT AIR |
| BKPB | CURRENT RATING METHOD | LOAD |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 0.0330 |
| CWDY | TEMP RATING | OPERATING CELSIUS 25.0 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE FULL LOAD 9600.0 |
| CWGL | CURRENT RATING IN AMPS | INPUT SINGLE 3.500 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 26.0 |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END SINGLE STYLE A23 |
| FEAT | SPECIAL FEATURES | SHAFT DOES NOT EXTEND BEYOND END OF INCLOSURE |
| TTQY | TERMINAL TYPE AND QUANTITY | CONNECTOR, PLUG 1 |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE OR COUNTERCLOCKWISE |
| AKPS | DUTY CYCLE | INTERMITTENT |
| ANPZ | ENCLOSURE FEATURE | TOTALLY ENCLOSED |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 0.1200 |
| AJLA | TEETH QUANTITY | 14 |
| AKAE | MAXIMUM OPERATING ALTITUDE RATING | FEET 35000.0 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 003259302. An older drawing citing one of those numbers resolves here.