NSN 6105-00-058-0123 · NIIN 000580123 · FSC 6105
NO DASHES 6105000580123
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | THREADED HOLE(S) 3 |
| BFMF | COOLING METHOD | NONVENTILATED |
| FAAZ | PHASE | INPUT SINGLE |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 115.0 |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END SINGLE STYLE A5 |
| CWFQ | MOUNTING FACILITY CIRCLE DIAMETER | INCHES 1.500 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE FULL LOAD 1650.0 |
| CWGL | CURRENT RATING IN AMPS | INPUT SINGLE 1.000 |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | ENCLOSURE FEATURE | TOTALLY ENCLOSED |
| AXCP | WINDING TYPE | SYNCHRONOUS |
| FEAT | SPECIAL FEATURES | SHAFT END HAS ONE ADDITIONAL FLAT AT 90.0 DEGREES |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| AAJV | OVERALL WIDTH | INCHES 1.750 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 0.2500 |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE |
| AXGY | MOUNTING METHOD | FACE |
| AAJU | OVERALL LENGTH | INCHES 3.645 |
| AAJT | OVERALL HEIGHT | INCHES 1.750 |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 0.683 |
| CWDY | TEMP RATING | OPERATING CELSIUS -40.0 AND OPERATING CELSIUS 75.0 AND AMBIENT CELSIUS 80.0 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 83-635755-00 | 88818 |
| C1141-200 | 88818 |
| C1141-2 | 88818 |
| C1141-2 | 05088 |
| 166985 | 09384 |
Supersedes
This item replaces cancelled NIIN 008770321. An older drawing citing one of those numbers resolves here.