NSN 6105-00-086-4349 · NIIN 000864349 · FSC 6105
NO DASHES 6105000864349
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END FIRST STYLE A14 AND SECOND STYLE A12 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 12.250 |
| ANPZ | ENCLOSURE FEATURE | SPRAY TIGHT |
| AXCP | WINDING TYPE | INDUCTION-SQUIRREL CAGE |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | SINGLE END INCHES 8.875 |
| FAAZ | PHASE | INPUT THREE |
| AKPS | DUTY CYCLE | CONTINUOUS |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 440.0 |
| BFMF | COOLING METHOD | FAN COOLED |
| BKPQ | INCLOSURE SPECIFICATION | MIL-STD-108 |
| CBBL | FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 40.0000 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 5.750 |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 10001-2481356 |
| TTQY | TERMINAL TYPE AND QUANTITY | THREADED STUD 3 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 2.0620 |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE OR COUNTERCLOCKWISE |
| AAJV | OVERALL WIDTH | INCHES 22.250 |
| AAUH | SPLINE MINOR DIAMETER | SINGLE END INCHES NOMINAL 1.8885 |
| ABGH | STEP DIAMETER | SINGLE END INCHES NOMINAL 1.9900 |
| ABGJ | STEP LENGTH | SINGLE END INCHES NOMINAL 2.6250 |
| ABSA | SPLINE QUANTITY | 31 |
| AXFH | SPLINE LENGTH | SINGLE END INCHES NOMINAL 2.0000 |
| AXGY | MOUNTING METHOD | FIXED BASE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 4 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE FULL LOAD 1180.0 |
| AAJT | OVERALL HEIGHT | INCHES 21.125 |
| AAJU | OVERALL LENGTH | INCHES 32.938 |
| CWDY | TEMP RATING | OPERATING CELSIUS 60.0 |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES 20.000 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| BUWEPSDWG2481356 | 44114 |
| 86746 | 71956 |
| 6105PL0900648 | 9009H |
| 2481356 | 10001 |