NSN 6105-00-086-4379 · NIIN 000864379 · FSC 6105
NO DASHES 6105000864379
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Technical characteristics
34 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 4 |
| AAJV | OVERALL WIDTH | INCHES 15.274 |
| AXGY | MOUNTING METHOD | FIXED BASE |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE OR COUNTERCLOCKWISE |
| AXCP | WINDING TYPE | INDUCTION-SQUIRREL CAGE |
| ABRR | KEYWAY WIDTH | SINGLE END INCHES NOMINAL 0.2500 |
| ABRV | KEYWAY DEPTH | SINGLE END INCHES NOMINAL 0.1050 |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | ENCLOSURE FEATURE | TOTALLY ENCLOSED |
| AASA | THREAD LENGTH | SINGLE END INCHES NOMINAL 0.7500 |
| AAJT | OVERALL HEIGHT | INCHES 15.250 |
| AAJU | OVERALL LENGTH | INCHES 17.250 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 0.9360 |
| AFYS | KEYWAY LENGTH | SINGLE END INCHES NOMINAL 1.0000 |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 3.0000 |
| CQJX | NOMINAL THREAD SIZE | SINGLE END INCHES 0.500 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 0.875 |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | SINGLE END INCHES 5.250 |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES 8.500 |
| CWDY | TEMP RATING | OPERATING CELSIUS 60.0 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE FULL LOAD 1150.0 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 7.000 |
| CWGL | CURRENT RATING IN AMPS | INPUT SINGLE 8.000 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 440.0 |
| FAAZ | PHASE | INPUT THREE |
| BFMF | COOLING METHOD | WATER COOLED |
| BKPB | CURRENT RATING METHOD | LOAD |
| BKPQ | INCLOSURE SPECIFICATION | MIL-STD-108 |
| BTBY | SHAFT END STYLE | |
| CBBL | FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION |
| CNMM | FRAME SIZE DESIGNATION | 215J |
| THSD | THREAD SERIES DESIGNATOR | SINGLE END UNIFIED NATIONAL COARSE (UNC) |
| TTQY | TERMINAL TYPE AND QUANTITY | THREADED STUD 5 |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| M3092 | 46175 |