NSN 6105-00-089-6824 · NIIN 000896824 · FSC 6105
NO DASHES 6105000896824
In Stock
MOTOR-TACHOMETER GENERATOR
Motors, Electrical
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 80.0 |
| FREQ | FREQUENCY IN HERTZ | 400.0 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 9 |
| AYHE | EXCITOR TYPE | SEPARATELY EXCITED |
| BFLQ | CALIBRATION SPEED IN RPM | 1000.0 |
| BFMF | COOLING METHOD | NONVENTILATED |
| BKPC | CALIBRATION VOLTAGE OUTPUT TYPE IN VOLTS | AC 0.435 |
| BKPH | TORQUE RATING AND TYPE | INCH-OUNCES STALLED 0.285 |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END SINGLE STYLE A14 |
| FAAZ | PHASE | INPUT TWO |
| ACDC | CURRENT TYPE | INPUT AC |
| AKAE | MAXIMUM OPERATING ALTITUDE RATING | FEET 10000.0 |
| ANPZ | ENCLOSURE FEATURE | TOTALLY ENCLOSED |
| AXFH | SPLINE LENGTH | SINGLE END INCHES NOMINAL 0.3350 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | CLAMP COLLAR 1 |
| AAJV | OVERALL WIDTH | INCHES 0.750 |
| AAUH | SPLINE MINOR DIAMETER | SINGLE END INCHES NOMINAL 0.1083 |
| ABSA | SPLINE QUANTITY | 13 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 0.1247 |
| AAJT | OVERALL HEIGHT | INCHES 0.750 |
| AAJU | OVERALL LENGTH | INCHES 2.375 |
| BKPS | CONTROL FIELD VOLTAGE TYPE AND RATING IN VOLTS | AC 18.0 AND AC 36.0 |
| CBBL | FEATURES PROVIDED | VERTICAL MOUNTING POSITION AND HORIZONTAL MOUNTING POSITION |
| CNXS | POWER RATING | INPUT WATTS 10.700 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 0.335 |
| CWDY | TEMP RATING | OPERATING CELSIUS -55.0 AND OPERATING CELSIUS 125.0 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE NO LOAD 6200.0 |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 123-062 | 19710 |
| IGA-010 | 40968 |
| 08MT-0102-F | 51761 |
| 55-08 | 67245 |
| 08G4LDF9A1 | 10112 |
| 08TGSM1004 | 14404 |
Supersedes
This item replaces cancelled NIIN 008140208. An older drawing citing one of those numbers resolves here.