NSN 6105-00-191-2915 · NIIN 001912915 · FSC 6105
NO DASHES 6105001912915
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Technical characteristics
40 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| BKPB | CURRENT RATING METHOD | LOAD |
| CWGL | CURRENT RATING IN AMPS | INPUT SINGLE 40.000 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 440.0 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 11.000 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE NO LOAD 1200.0 AND SINGLE FULL LOAD 1155.0 |
| BKPH | TORQUE RATING AND TYPE | FOOT-POUNDS STARTING 213.9 |
| FAAZ | PHASE | INPUT THREE |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 3 |
| AXFH | SPLINE LENGTH | FIRST END INCHES NOMINAL 1.055 |
| AXFH | SPLINE LENGTH | SECOND END INCHES NOMINAL 2.000 |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| BYDT | BEARING TYPE | ANNULAR BALL |
| CBBL | FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION |
| CNMM | FRAME SIZE DESIGNATION | 256UNY |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 15.0000 |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES 10.000 |
| CWDY | TEMP RATING | AMBIENT CELSIUS 50.0 |
| ABSA | SPLINE QUANTITY | 19 |
| ABSA | SPLINE QUANTITY | 25 |
| ABWV | SHAFT DIAMETER | FIRST END INCHES MINIMUM 0.986 AND INCHES MAXIMUM 0.991 |
| ABWV | SHAFT DIAMETER | SECOND END INCHES MINIMUM 1.611 AND INCHES MAXIMUM 1.616 |
| AGQL | UNDERCUT LENGTH | FIRST END INCHES MINIMUM 0.046 AND INCHES MAXIMUM 0.049 |
| AGQL | UNDERCUT LENGTH | SECOND END INCHES MINIMUM 0.068 AND INCHES MAXIMUM 0.072 |
| AKPS | DUTY CYCLE | INTERMITTENT |
| ANPZ | ENCLOSURE FEATURE | SPRAY TIGHT |
| AXCP | WINDING TYPE | INDUCTION-SQUIRREL CAGE |
| ABPA | UNDERCUT DIAMETER | FIRST END INCHES MINIMUM 0.940 AND INCHES MAXIMUM 0.943 |
| ABPA | UNDERCUT DIAMETER | SECOND END INCHES MINIMUM 1.524 AND INCHES MAXIMUM 1.534 |
| AAJV | OVERALL WIDTH | INCHES 17.312 |
| AAUH | SPLINE MINOR DIAMETER | FIRST END INCHES MINIMUM 0.876 AND INCHES MAXIMUM 1.473 |
| AAUH | SPLINE MINOR DIAMETER | SECOND END INCHES MINIMUM 1.473 AND INCHES MAXIMUM 1.483 |
| BFNF | UNDERCUT CENTER TO SHAFT END DISTANCE | SECOND END INCHES NOMINAL 2.034 |
| AAJT | OVERALL HEIGHT | INCHES 14.875 |
| AAJU | OVERALL LENGTH | INCHES 27.688 |
| AXGY | MOUNTING METHOD | FIXED BASE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 4 |
| BFLT | TIME INTERVAL | HOURS MAXIMUM ON 1.0 |
| BFMF | COOLING METHOD | FAN COOLED |
| BFNF | UNDERCUT CENTER TO SHAFT END DISTANCE | FIRST END INCHES NOMINAL 1.133 |