NSN 6105-00-211-5746 · NIIN 002115746 · FSC 6105
NO DASHES 6105002115746
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Technical characteristics
33 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| BKPH | TORQUE RATING AND TYPE | INCH-OUNCES RUNNING 0.5 |
| BFLT | TIME INTERVAL | SECONDS MAXIMUM ON 30.0 AND SECONDS MINIMUM OFF 30.0 |
| BFMF | COOLING METHOD | NONVENTILATED |
| BKPB | CURRENT RATING METHOD | LOAD |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 3 |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | CLAMP COLLAR 1 |
| CWHZ | SHAFT END CHARACTERISTIC | SECOND END SINGLE STYLE A14 |
| FAAZ | PHASE | INPUT SINGLE |
| FREQ | FREQUENCY IN HERTZ | 50.0 OR 60.0 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE FULL LOAD 3600.0 |
| CWGL | CURRENT RATING IN AMPS | INPUT SINGLE 0.250 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 115.0 |
| CWHZ | SHAFT END CHARACTERISTIC | FIRST END SINGLE STYLE A5 |
| AGRB | FLAT DEPTH | SINGLE END INCHES NOMINAL 0.032 |
| AKCT | SHAFT ROTATION DIRECTION | FIRST END CLOCKWISE |
| AKCT | SHAFT ROTATION DIRECTION | SECOND END COUNTERCLOCKWISE |
| AKPS | DUTY CYCLE | INTERMITTENT |
| ANPZ | ENCLOSURE FEATURE | TOTALLY ENCLOSED |
| AXCP | WINDING TYPE | INDUCTION-SINGLE VALUE CAPACITOR SPLIT PHASE |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SECOND END INCHES 0.281 |
| AAJT | OVERALL HEIGHT | INCHES 1.094 |
| AAJU | OVERALL LENGTH | INCHES 2.718 |
| AAJV | OVERALL WIDTH | INCHES 1.094 |
| AAUH | SPLINE MINOR DIAMETER | SECOND END INCHES NOMINAL 0.108 |
| ABSA | SPLINE QUANTITY | 13 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 0.125 |
| ABXQ | FLATTED PORTION LENGTH | FIRST END INCHES NOMINAL 0.156 |
| AXFH | SPLINE LENGTH | SECOND END INCHES NOMINAL 0.156 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| CBBL | FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION |
| CWCS | LENGTH OF SHAFT FROM HOUSING | FIRST END INCHES 0.156 |