NSN 6105-00-212-7959 · NIIN 002127959 · FSC 6105
NO DASHES 6105002127959
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Technical characteristics
28 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| BKPQ | INCLOSURE SPECIFICATION | MIL-STD-108 |
| BFMF | COOLING METHOD | AMBIENT AIR |
| BFLT | TIME INTERVAL | HOURS MAXIMUM ON 1.0 |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END SINGLE STYLE A9 |
| FAAZ | PHASE | INPUT THREE |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| AXCP | WINDING TYPE | INDUCTION-SQUIRREL CAGE |
| AXGY | MOUNTING METHOD | FIXED BASE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 4 |
| AAJU | OVERALL LENGTH | INCHES 39.000 |
| AAJV | OVERALL WIDTH | INCHES 24.500 |
| ABRR | KEYWAY WIDTH | SINGLE END INCHES NOMINAL 0.5000 |
| ABRV | KEYWAY DEPTH | SINGLE END INCHES NOMINAL 0.2500 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES MINIMUM 2.124 AND INCHES MAXIMUM 2.125 |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 4.812 |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | SINGLE END INCHES 12.500 |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES 16.000 |
| CWDY | TEMP RATING | OPERATING CELSIUS 40.0 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE FULL LOAD 1725.0 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 20.000 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 440.0 |
| AAJT | OVERALL HEIGHT | INCHES 29.062 |
| AKPS | DUTY CYCLE | INTERMITTENT |
| ANPZ | ENCLOSURE FEATURE | SPLASH PROOF PROTECTED |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 3 |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 12.5000 |
| CBBL | FEATURES PROVIDED | VERTICAL MOUNTING POSITION |