NSN 6105-00-227-1412 · NIIN 002271412 · FSC 6105
NO DASHES 6105002271412
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Technical characteristics
37 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END FIRST STYLE A2 AND SECOND STYLE A9 AND THIRD STYLE A12 |
| FAAZ | PHASE | INPUT THREE |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL---1940 |
| THSD | THREAD SERIES DESIGNATOR | SINGLE END UNF |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 3 |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE SERVICE A |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 440.0 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE FULL LOAD 3535.0 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 8.000 |
| CWDY | TEMP RATING | OPERATING CELSIUS 40.0 AND AMBIENT CELSIUS 70.0 |
| AAJT | OVERALL HEIGHT | INCHES 11.812 |
| AAJU | OVERALL LENGTH | INCHES 17.813 |
| AAJV | OVERALL WIDTH | INCHES 9.750 |
| AASA | THREAD LENGTH | SINGLE END INCHES NOMINAL 0.5620 |
| ABGH | STEP DIAMETER | SINGLE END INCHES NOMINAL 0.7500 |
| ABGJ | STEP LENGTH | SINGLE END INCHES NOMINAL 4.1880 |
| ABRR | KEYWAY WIDTH | SINGLE END INCHES NOMINAL 0.1880 |
| ABRV | KEYWAY DEPTH | SINGLE END INCHES NOMINAL 0.0940 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES MINIMUM 0.750 AND INCHES MAXIMUM 1.063 |
| AFYS | KEYWAY LENGTH | SINGLE END INCHES NOMINAL 1.2190 |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE OR COUNTERCLOCKWISE |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | ENCLOSURE FEATURE | DRIPPROOF-15 DEG |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES 5.500 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 6.188 |
| AXCP | WINDING TYPE | INDUCTION-SQUIRREL CAGE |
| AXGY | MOUNTING METHOD | FIXED BASE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 4 |
| BFMF | COOLING METHOD | NATURAL CONVECTION VENTILATED |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| BTBY | SHAFT END STYLE | |
| CBBL | FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION |
| CNMM | FRAME SIZE DESIGNATION | 203 |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 1.5000 |
| CQJX | NOMINAL THREAD SIZE | SINGLE END INCHES 0.500 |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | SINGLE END INCHES 5.000 |
Cross-references
7 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 55J740SUB5PC1T023 | 79500 |
| 6301F3102298PC1T023 | 80064 |
| S6301-3102298 | 80064 |
| 563-6202-933780ALT9PC13 | 80064 |
| MILM1940TYPESERVICEA | 81349 |
| S1660611 | 11660 |
| 55J740 | 11660 |