NSN 6105-00-241-8980 · NIIN 002418980 · FSC 6105
NO DASHES 6105002418980
In Stock
MOTOR,DIRECT CURRENT
Motors, Electrical
Technical characteristics
32 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJT | OVERALL HEIGHT | INCHES 14.125 |
| AAJU | OVERALL LENGTH | INCHES 22.375 |
| AAJV | OVERALL WIDTH | INCHES 10.938 |
| AASA | THREAD LENGTH | SINGLE END INCHES NOMINAL 0.6880 |
| ABRR | KEYWAY WIDTH | SINGLE END INCHES NOMINAL 0.1880 |
| ABRV | KEYWAY DEPTH | SINGLE END INCHES NOMINAL 0.0940 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 0.7500 |
| AFYS | KEYWAY LENGTH | SINGLE END INCHES NOMINAL 1.8750 |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE OR COUNTERCLOCKWISE |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | ENCLOSURE FEATURE | DRIPPROOF PROTECTED-45 DEG |
| AXCP | WINDING TYPE | COMPOUND WOUND |
| AXGY | MOUNTING METHOD | FIXED BASE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 4 |
| BFMF | COOLING METHOD | SELF-VENTILATED |
| BKPB | CURRENT RATING METHOD | LOAD |
| BKPQ | INCLOSURE SPECIFICATION | MIL-STD-108 |
| CBBL | FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 2.0000 |
| CQJX | NOMINAL THREAD SIZE | SINGLE END INCHES 0.500 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 2.500 |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | SINGLE END INCHES 7.125 |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES 6.750 |
| CWDY | TEMP RATING | AMBIENT CELSIUS 40.0 AND OPERATING CELSIUS 50.0 |
| CWFX | ROTOR SPEED RATING IN RPM | LOW FULL LOAD 3320.0 AND HIGH FULL LOAD 3500.0 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 9.000 |
| CWGL | CURRENT RATING IN AMPS | INPUT SINGLE 8.200 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 230.0 |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END FIRST STYLE A2 AND SECOND STYLE A9 |
| THSD | THREAD SERIES DESIGNATOR | SINGLE END UNF |
| TTQY | TERMINAL TYPE AND QUANTITY | CONNECTOR, PLUG 1 |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | SERVICE A |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| S04B2110 | 79500 |
| MIL-M-17556 | 81349 |
| S04B2110 | 11660 |