NSN 6105-00-258-9006 · NIIN 002589006 · FSC 6105
NO DASHES 6105002589006
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Technical characteristics
29 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJT | OVERALL HEIGHT | INCHES 3.500 |
| AAJU | OVERALL LENGTH | INCHES 6.480 |
| AAJV | OVERALL WIDTH | INCHES 4.000 |
| ABWV | SHAFT DIAMETER | IDENTICAL ENDS INCHES NOMINAL 0.128 |
| ABXQ | FLATTED PORTION LENGTH | IDENTICAL ENDS INCHES NOMINAL 1.000 |
| AGRB | FLAT DEPTH | IDENTICAL ENDS INCHES NOMINAL 0.028 |
| AKCT | SHAFT ROTATION DIRECTION | IDENTICAL ENDS CLOCKWISE |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | ENCLOSURE FEATURE | GENERAL PURPOSE |
| AXCP | WINDING TYPE | INDUCTION-SQUIRREL CAGE |
| AXGY | MOUNTING METHOD | FIXED BASE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | THREADED HOLE(S) 4 |
| BFMF | COOLING METHOD | NONVENTILATED |
| BKPB | CURRENT RATING METHOD | LOAD |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| CBBL | FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION |
| CNXS | POWER RATING | OUTPUT WATTS 130.0 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | IDENTICAL ENDS INCHES 1.330 |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | IDENTICAL ENDS INCHES 1.750 |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES 0.812 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE FULL LOAD 3150.0 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 1.375 |
| CWGL | CURRENT RATING IN AMPS | INPUT SINGLE 0.750 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 115.0 |
| CWHZ | SHAFT END CHARACTERISTIC | IDENTICAL ENDS SINGLE STYLE A5 |
| FAAZ | PHASE | INPUT THREE |
| FEAT | SPECIAL FEATURES | SHAFT END STYLE A5 EXCEPT ADDITIONAL FLAT LOCATED AT 90 DEG WITH SAME DIM. |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 3 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 14436 | 02598 |