NSN 6105-00-500-0716 · NIIN 005000716 · FSC 6105
NO DASHES 6105005000716
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Technical characteristics
29 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| FAAZ | PHASE | INPUT THREE |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END FIRST STYLE A2 AND SECOND STYLE A11 AND THIRD STYLE A12 |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL---1940 |
| AXGY | MOUNTING METHOD | FIXED BASE |
| THSD | THREAD SERIES DESIGNATOR | SINGLE END UNIFIED NATIONAL COARSE (UNC) |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 0.6250 |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 0.7500 |
| CQJX | NOMINAL THREAD SIZE | SINGLE END INCHES 0.500 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 6.187 |
| CBBL | FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION |
| CWDY | TEMP RATING | OPERATING CELSIUS 50.0 AND AMBIENT CELSIUS 45.0 |
| AAJV | OVERALL WIDTH | INCHES 12.750 |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | ENCLOSURE FEATURE | TOTALLY ENCLOSED |
| AXCP | WINDING TYPE | INDUCTION-SQUIRREL CAGE |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE FULL LOAD 3570.0 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 8.000 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 440.0 |
| BKPQ | INCLOSURE SPECIFICATION | MIL-STD-108 |
| BTBY | SHAFT END STYLE | |
| AAJT | OVERALL HEIGHT | INCHES 9.750 |
| AAJU | OVERALL LENGTH | INCHES 18.937 |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | SINGLE END INCHES 5.000 |
| AASA | THREAD LENGTH | SINGLE END INCHES NOMINAL 0.5000 |
| BFMF | COOLING METHOD | AMBIENT AIR |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 4 |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES 6.500 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| S1775006 | 65054 |
| S1775006 | 79500 |
| MILM1940SERVICEACLASSAINSULATI0N | 81349 |
| S1775006 | 11660 |