NSN 6105-00-500-4889 · NIIN 005004889 · FSC 6105
NO DASHES 6105005004889
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AKPS | DUTY CYCLE | CONTINUOUS |
| CBBL | FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION |
| CWCS | LENGTH OF SHAFT FROM HOUSING | FIRST END INCHES 2.812 |
| AXCP | WINDING TYPE | INDUCTION-SQUIRREL CAGE |
| AXGY | MOUNTING METHOD | FIXED BASE |
| BFMF | COOLING METHOD | FAN COOLED |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 25.0000 |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 4 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 440.0 |
| BKPB | CURRENT RATING METHOD | LOAD |
| BKPQ | INCLOSURE SPECIFICATION | MIL-STD-108 |
| AAJT | OVERALL HEIGHT | INCHES 20.375 |
| AAJU | OVERALL LENGTH | INCHES 39.640 |
| AAJV | OVERALL WIDTH | INCHES 21.187 |
| CWDY | TEMP RATING | OPERATING CELSIUS 50.0 AND AMBIENT CELSIUS 65.0 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE NO LOAD 3600.0 AND SINGLE FULL LOAD 3550.0 |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL---17060A |
| CWGL | CURRENT RATING IN AMPS | INPUT SINGLE 31.000 |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES 12.250 |
| ANPZ | ENCLOSURE FEATURE | TOTALLY ENCLOSED |
| ANTN | SPECIFIC USE | FIRE AND BILGE PUMP |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SECOND END INCHES 4.062 |
| FAAZ | PHASE | INPUT THREE |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 7.000 |