NSN 6105-00-519-2928 · NIIN 005192928 · FSC 6105
NO DASHES 6105005192928
In Stock
MOTOR,DIRECT CURRENT
Motors, Electrical
Technical characteristics
28 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| BFLT | TIME INTERVAL | MINUTES MAXIMUM ON 1.0 AND MINUTES MINIMUM OFF 9.0 |
| AXGY | MOUNTING METHOD | PAD |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 4 |
| AXCP | WINDING TYPE | SERIES WOUND |
| AAJV | OVERALL WIDTH | INCHES 2.000 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 0.2530 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 0.771 |
| CWDY | TEMP RATING | OPERATING CELSIUS 40.0 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE FULL LOAD 11000.0 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 1.669 |
| CWGD | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | INCHES 1.669 |
| CWGL | CURRENT RATING IN AMPS | INPUT SINGLE 7.500 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 26.0 |
| BFMF | COOLING METHOD | NONVENTILATED |
| BFMS | FULL TOOTH LENGTH | SINGLE END INCHES NOMINAL 0.7710 |
| BKPB | CURRENT RATING METHOD | LOAD |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| AJLA | TEETH QUANTITY | 7 |
| AKAE | MAXIMUM OPERATING ALTITUDE RATING | FEET 50000.0 |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE OR COUNTERCLOCKWISE |
| AKPS | DUTY CYCLE | INTERMITTENT |
| ANPZ | ENCLOSURE FEATURE | TOTALLY ENCLOSED |
| AAJT | OVERALL HEIGHT | INCHES 2.000 |
| AAJU | OVERALL LENGTH | INCHES 5.055 |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END SINGLE STYLE A17 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 2 |
| CBBL | FEATURES PROVIDED | VERTICAL MOUNTING POSITION |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 0.1100 |